Elevator Problem Discussion

• NEW - ElevatorMax© Discussion Group (3/19/2005) (Ray Griffin, elevatorguy@geocities.com, 2005-03-16)
• Business software (Opal Brown, opalybrown@aol.com, 2005-03-15)
• THYSSEN LS2 Liftcontroller (Jonny Ar, liftco08@excite.com, 2005-03-15)
• Piano wire cuts down (Gowri shankar, gowrishankars@rediffmaoil.com, 2005-03-15)
• Dover Composite Optical Leveling PC Board (Jim, elevator555@hotmail.com, 2005-03-15)
• How can i get an emulator (Ângelo, Crazyflash@netcabo.pt, 2005-03-14)
• dover DMC selector waterproofing (norm swan, nswan@genelev.com, 2005-03-14)
• Estimated installation hours (Johnny Cash, livingunderarock@gmail.com, 2005-03-14)
• otis transistor (bob, bob.morgan@blueyonder.co.uk, 2005-03-14)
• Motion Control (Clark, pdell200@comcast.net, 2005-03-13)
• Replacement of elevators. What should I be asking? (Philip Vitale, pvbklyn@yahoo.com, 2005-03-13)
• Otis MCS 321 PC boards and Duplexing (Nathan, Nathan_771@hotmail.com, 2005-03-12)
• Schumacher elevator ????? (!@#%%^, elevatorpr2000@yahoo.com, 2005-03-11)
• Dover horizontal selector on top of controller (drew, drewgost@hotmail.com, 2005-03-11)
• strike (smokinjoe, crescent37@juno.com, 2005-03-11)
• California Elevator Pump (Taylor Semingson, tsemings@ucsd.edu, 2005-03-10)
• need whistlestops 1929 Otis elevator (Margaret Clarson, margaretclarson@sbcglobal.net, 2005-03-09)
• hydraulic ,tracton and jackscrew (david clarke, purse10@zwallet.com, 2005-03-09)
• 8 years MITSUBISHI adjustment¡¢maintenance technician,seeking a job in Australia¡¢New Zealand or Singapore (wu, wy30@163.net, 2005-03-09)
• U.S. Elevator Client Refresh tool (Rodney W. Pearcy, classicgm@charter.net, 2005-03-08)
• Degree Program (Dan, justsomeguylookin2@hotmail.com, 2005-03-08)
• Star Wheel Selector on a Montgomery Elevator (Brian Kice, brian@starkersreserve.com, 2005-03-08)
• shindler (david clarke, purse10@zwallet.com, 2005-03-08)
• SE Sales Engineer (Chris Cleaver, chris_cleaver@hotmail.com, 2005-03-08)
• Elevator Cab Modernization Rates Per Hour (John Goldrick, jj@downtown-properties.com, 2005-03-08)
• vacon elevator drives (keyvan esfahani, keyvan_esfahani@yahoo.com, 2005-03-08)
• Ascension Parts (eric listy, eric.listy@kone.com, 2005-03-07)
• manual elevators (david clarke, purse10@zwallet.com, 2005-03-07)
• prices for parts (george, noinfo9@hotmail.com, 2005-03-07)
• Add Water to Oil? Hydro Electric Freight Elevator (Katie Holderith, K.holderith@sbcglobal.net, 2005-03-06)
• OTIS 211 with QL Operator (Will, mtnrambo@msn.com, 2005-03-06)
• MPH-II (cc, waeio2004@yahoo.com, 2005-03-04)
• Allocation of Elevator Contract Costs (BRS, wooddog2@yahoo.com, 2005-03-04)
• Kone Monospace info (george, noinfo@hotmail.com, 2005-03-04)
• Spare Parts of IGV Lifts, Italy (Dibangshu Saha, kineticelv@dhaka.net, 2005-03-04)
• schindler (kvs, groucho0@aol.com, 2005-03-03)
• Armour Kone hydro prints (Kevin Ferrie, kferrie@allcityelevator.com, 2005-03-03)
• ECI Door Restrictors (Jim, elevator555@hotmail.com, 2005-03-02)
• Proprietary or Non proprietary (rs41203@yahoo.com.sg, 2005-03-02)
• GEC Multiplexed push unit (elevguy, elevguy@yahoo.com, 2005-03-02)
• where can i get gate wheels for top of gurney elevator car (kevin henry, kevinthenry@juno.com, 2005-03-01)
• Fuji Inverter keypad for FVRO.2E9S-2FR1 (elevguy@yahoo.com, 2005-03-01)
• How does the piston work on a Dover Relay Hydro (Mike Watson, mike.watson@wellsref.com, 2005-02-28)
• Peak Oil and Elevators (Jim, elevator555@hotmail.com, 2005-02-27)
• M.G. & Motor Brushes (Al, Al E Vtr@aol.com, 2005-02-27)
• TAC 20 How many Starts before Shut Down (Brian, m428rl@hotmail.com, 2005-02-26)
• central diagram & info site (worldwide) (the lift genie, iamthelift-genie@yahoo.com, 2005-02-26)
• Highrise Dumbwaiter Controls (Jim, elevator555@hotmail.com, 2005-02-26)
• Overspeed governor calibration (liftgenie-liftgods@yahoo.com, 2005-02-25)
• Problem with US elevator Assention Controller (Paul M Christensen, pchristensen@paxchristi.com, 2005-02-25)
• Schindler Electronic Valve (Jim, elevator555@hotmail.com, 2005-02-23)
• Otis J Vintage 01 doors (the liftman, theliftman@hotmail.com, 2005-02-23)
• Replacement govenors (Rick Hoebbel, Rozyl134@aol.com, 2005-02-23)
• Maintenance (Drew, drewgost@hotmail.com, 2005-02-22)
• Cenia Elevator Controller Drawing (S.Sivakumar, ssivakumar@starelevators.com, 2005-02-22)
• Elevator Wiring Diagrams (Bob Heale, robert.heale@durhamcollege.ca, 2005-02-21)
• Otis drum drive (Jon, jkh824@comcast.net, 2005-02-21)
• Kone MG28 Gearless machine (Rob Wagner, rla.wagner@smpatico.ca, 2005-02-21)
• Types of elevator system used on widebody aircraft. (Dan, Dtxmarvin@aol.com, 2005-02-20)
• 1978 Serge 3 stop hydro stepper (Danny Way, elevdoc@optonline.net, 2005-02-20)
• What Eprom burners are you using (Jim, elevator555@hotmail.com, 2005-02-18)
• What's this equipment? (Christopher, RTSbusguy@hotmail.com, 2005-02-17)
• prints (greg wahl, emanrny@yahoo.com, 2005-02-16)
• average cost of 40'X60" installed elevator (JOHN WALLACE, dalorcha@pacbell.net, 2005-02-16)
• mod master parameters (daniel alfonso galindo, danizuko2000@hotmail.com, 2005-02-15)
• How does and elevator work and what is its relationship to a splice in a cable? (Shirley Moore, infinity_sm@yahoo.com, 2005-02-15)
• Swift Futura (Frank, francis1@tinyonline.co.uk, 2005-02-14)
• TAC 50 (Bill White, 321web@cox.net, 2005-02-14)
• Early 1900's Warner Rope Oper. Freight Elevator (Jeremy Gossett, jeremygossett@msn.com, 2005-02-13)
• Dover DP--120-25 & RA8015-3 Wiring diagrams needed (David A. Derk, maddog1.11@netzero.net, 2005-02-13)
• Elevator Safety wiring diagrams (David A. Derk, maddog1.11@netzero.net, 2005-02-13)
• US Elevator CIA tool refresh software (Rodney Pearcy, classicgm@charter.net, 2005-02-10)
• ISIS (Will, mtnrambo@msn.com, 2005-02-10)
• KONE - TMS516 V3F20 programming tool (Peter, peter9n34@yahoo.co.in, 2005-02-09)
• Sealing the Shaft (Bruce Hicks, brucetci@bellsouth.net, 2005-02-08)
• Is there RF Noise kit for ThyssenKrupp TAC50 (David Brandenburg, davidbra@sprynet.com, 2005-02-07)
• Safety factor for suspension ropes (David Touito, david.touito@isralift.co.ii, 2005-02-07)
• Difference between Breaking Chopper & Breaking Resistor (Sivakumar, ssivakumar@sesmt.com, 2005-02-07)
• GEC Express Lift information (leo, akchan326@yahoo.com.hk, 2005-02-06)
• escalataor,more load, slower? or still in the same speed...? (Margaret A, margaret_anson@yahoo.com, 2005-02-06)
• Re rope winding device (PAUL SCHOFIELD, louisems@bigpond.net.au, 2005-02-06)
• Otis Test tool emulator (Rich, richmeg@lineone.net, 2005-02-04)
• Controller for ELEX-GMV hydraulic elevator (Garfield, garfield1682005@yahoo.com, 2005-02-04)
• Dong Yang - CEC escalator parts (Charles De Tillieux, cfjr@qc.aira.com, 2005-02-03)
• Fujitec Parts (quinnfield1@yahoo.com, 2005-02-03)
• hoistraco (EVA, instok@wanadoo.fr, 2005-02-03)
• 120hz Hum from Otis Gearless (Bill Williams, willm@hotmail.com, 2005-02-02)
• GARAVENTA GSL-2 Maintenance Manual (Ivica, ivica@indeplifts.com.au, 2005-02-02)
• oakland elevators (kvs, groucho0@aol.com, 2005-02-02)
• CAD OTIS ESCALATOR DRAWINGS - UB series (Vitor Ribeiro, vitor.ribeiro@focus24h.com, 2005-02-02)
• anyone take on tac 20 other than thy? (normswan, nswan@genelev.com, 2005-02-02)
• Where to purchase IGBT for Dover Tac 20 - 50 (gregory Perello, perello@aol.com, 2005-02-02)
• Schindler Mikonic V (scubaguy_08@yahoo.com.au, 2005-02-02)
• Needed Thames Valley PC Board (Jim, elevator555@hotmail.com, 2005-02-02)
• Need prints for 1920 leland homelift elevator four stop (Nico Gatzaros, Freakonico@comcast.net, 2005-02-01)
• Curti UK Hyd Diagrams (The Liftman, theliftman@hotmail.com, 2005-01-30)
• Tac 20 (nofear971@hotmail.com, 2005-01-29)
• Hoist rope wear (steve carlson, shammcar1@aol.com, 2005-01-28)
• Hollister Encoder Issues (Brian, m428rl@hotmail.com, 2005-01-28)
• Mitsubishi Old DC gearless (elevguy, elevguy@yahoo.com, 2005-01-28)
• ASME A17.1 1996 Elevator Testing Check Forms (Jim, elevator555@hotmail.com, 2005-01-27)
• dover traction call cancel (phil berio, robbo1026@hotmail.com, 2005-01-27)
• Response to door detector failures (Eric Appana, aappanajr@aol.com, 2005-01-26)
• Tac 20 (george, nofear971@hotmail.com, 2005-01-26)
• miprom21 digital drive car vibration (george, pdm2003@comcast.net, 2005-01-26)
• door detector failures (patrick a. carrajat, lickem@cblconsult.com, 2005-01-26)
• elevator database (elevguy, elevguy@yahoo.com, 2005-01-26)
• PDA's (Drew, drewgost@hotmail.com, 2005-01-26)
• Westinghouse 375 machines (jon webster, jwebst23@hotmail.com, 2005-01-25)
• Dover T2 Questions (QuinnField, quinnfield1@yahoo.com, 2005-01-25)
• any good otis engineers out there? (newbie, unrealdexter@hotmail.com, 2005-01-25)
• Wages around the world for elevator tech's? (Maika, maika@mocon.com.au, 2005-01-25)
• SWIFT (!@#%%^, elevatorpr2000@yahoo.com, 2005-01-24)
• Fujitec Mill-2 enhanced safety software (Jack Whitefeather, redmantech@hotmail.com, 2005-01-21)
• 1911 Otis Elevator worm drive gearbox specs. (George Karl, gkarl@tscnet.com, 2005-01-20)
• control systems. (james lewis, jabulalifts@mweb.co.za, 2005-01-20)
• Any Market for 1946 Freight Elevator Hardware? (Bill Kloos, billkloos@landuseoregon.com, 2005-01-19)
• Fujitec Elevator not bidding anymore new construction. (Jack More, b4042261837@yahoo.com, 2005-01-19)
• Shepard Home Lift Elevator (Looking for Schematics) (Cathleen Weaver, gcjm1969@nc.rr.com, 2005-01-19)
• Job vacancies (Alun Williams, alunwilliamslifts@yahoo.co.uk, 2005-01-19)
• New Schindler Electronic Valve (Jim, elevator555@hotmail.com, 2005-01-19)
• Rotary Lift (Jon, jkh824@comcast.net, 2005-01-19)
• DAN Elevator spares (Malcolm Vicars, malvicars@hotmail.com, 2005-01-18)
• inexpensive DMC tool (Pete smith, southwest3_@yahoo.com, 2005-01-16)
• REFORMING BUS CAPACITORS (Jeff, jeff_ghrt@yahoo.com, 2005-01-16)
• ENOR busco diagramas, y manuales (juan, busco_diagramas@yahoo.es, 2005-01-15)
• Otis MRS (Tom, rross3351@charter.net, 2005-01-15)
• microtek (cc, candc40@comcast.net, 2005-01-14)
• FUJITEC control panel a2dg-2sc-23e, busco diagrama y manuales. (juan, busco_diagramas@yahoo.es, 2005-01-14)
• MITSUBISHI, VFDL, AI-21, diagram needed (james, coil41@yahoo.co.uk, 2005-01-14)
• MITSUBISHI, VFDL, AI-21, diagram & manuals, needed (james, coil41@yahoo.co.uk, 2005-01-14)
• thyssen tac-20 (phil berio, robbo1026@hotmail.com, 2005-01-13)
• Shindler fixtures (SM, scal@usa.com, 2005-01-13)
• Otis electrical diagram needed. (Max, datalev@yahoo.ca, 2005-01-12)
• Motor or Pump Application Error? (Noel T, noel.takahara@meus.mea.com, 2005-01-10)
• NEC Article 620 (Jim B, fixingelevators@sbcglobal.net, 2005-01-08)
• thyssen lifts (kvs, groucho0@aol.com, 2005-01-08)
• Fujitec diagnostic tool (PMC) wanted (elevguy, elevguy@yahoo.com, 2005-01-08)
• freedom tower contract (elevatorman911@aol.com, 2005-01-07)
• Wiring Diagrams (Gary Price, garyp@templelifts.ltd.uk, 2005-01-06)
• Permanent Magnet Synchronous motor? (Raja, rs41203@yahoo.com.sg, 2005-01-06)
• Vectror drive (Raja, rs41203@yahoo.com.sg, 2005-01-06)
• EEPROM and EPROM and software lock (Raja, rs41203@yahoo.com.sg, 2005-01-06)
• Armor Dynaglide Mod 1 Gearless Adaptor board print needed (Jim, elevator555@hotmail.com, 2005-01-06)
• old shepard elevator (paul, tiffanypolice@aol.com, 2005-01-05)
• MPH ride (S M, scal@usa.com, 2005-01-05)
• thyssen diagnostic tool (bob, liftfixer@hotmail.co.uk, 2005-01-05)
• Is there a way to sheath the jack if the PVC liner has leaked? (Thomas G Curtin, tcurtin@uamail.albany.edu, 2005-01-04)
• OTIS SERVICE TOOL (HOSAM MAHDI, nce@p-i-s.com, 2005-01-03)
• dover t-3 adjustment (Phil Berio, robbo1026@hotmail.com, 2005-01-02)
• Engineers jobs (kvs, kaph9@aol.com, 2005-01-02)
• Digital Electronic Gauge for DBG measurement (Sivakumar.S, ssivakumar@sesmt.com, 2005-01-02)
• mce problem (cliff, cliffchiyo@verizon.net, 2004-12-30)
• Spare parts for Selcom doors (José Ochoa, jj65248@hotmail.com, 2004-12-28)
• DMC Service Tool (John Varsick, elevatorman@midsouth.rr.com, 2004-12-26)
• Bode Brake Experience or Comments (Mark, MarkVator@comcast.net, 2004-12-24)
• need a semikron SKiiP module (k.mohan, mohank90@hotmail.com, 2004-12-24)
• Automatic Rescue Device for Kleeman Atlas Controller (S.Sivakumar, ssivakumar@sesmt.com, 2004-12-23)
• Dover WRC or WCR (Dan, justsomeguylookin2@hotmail.com, 2004-12-22)
• Dover Vecta Boards (Rob Wagner, rwagner@can.fujitec.com, 2004-12-21)
• Difference in VFDs (S.Sivakumar, ssivakumar@sesmt.com, 2004-12-21)
• KONE MONOSPACE DIAGNOSTIC TOOL AND SPARE PARTS OR COMPLETE LIFT PACKAGE (Zvonko Bartol, zvonko.bartol@siol.net, 2004-12-20)
• jobs (groucho0@aol.com, 2004-12-20)
• Torqmax Startup with Leroy PM Motor (Ivica, ivica@indeplifts.com.au, 2004-12-19)
• mph2 growling and vibrating bad! (joe, whobwho@yahoo.com, 2004-12-17)
• mowery- able sold? (norm swan, norm@gen.com, 2004-12-17)
• home lift replacement gear and motor units (gary bright, gary@ideallifts.com, 2004-12-17)
• jobs (kvs, groucho9@aol.com, 2004-12-16)
• Hoistway door interlocks-where to buy (richard waters, industry@mindspring.com, 2004-12-15)
• Mitsubishi DC gearless TFNL2 dwg (kumar, kumarfuji@hotmail.com, 2004-12-12)
• Vaccum Flouresent Dispaly (S.Sivakumar, ssivakumar@sesmt.com, 2004-12-12)
• transfer of state licenses? (Jim B, seekingtruth@sbcglobal.net, 2004-12-10)
• Kone Service Tool v 6.06 (Tim Reese, sales@secondhanddaylight.com, 2004-12-10)
• PDA, anyone us them? (paul, pielacey@hotmail.com, 2004-12-10)
• check list (bob the biulder, ozalice2000@yahoo.com, 2004-12-10)
• dover t-3 DAR FAULT (ralph bertolli, robbo1026@hotmail.com, 2004-12-09)
• Thames Valley (Jim, www.elevator555@hotmail.com, 2004-12-09)
• Dover Condo Elevator Lifespan / Rebuild?? (Grace Olson, Candieeekisses@yahoo.com, 2004-12-09)
• Wormshaft specifications (Ed Seeley, ed@seeley.biz, 2004-12-09)
• Machine room heat release calculation (M Ts, cronept@msn.com, 2004-12-08)
• Unlock Smartlift Sistel (João Pires, cordep@sapo.pt, 2004-12-08)
• Armor Timer Definitions (David Lomas, davidlomas@rogers.com, 2004-12-08)
• Anyone know who made this guide? (Dan, justsomeguylookin2@hotmail.com, 2004-12-07)
• DMS Dongle (Robert Varick, robertv@yahoo.com, 2004-12-07)
• Door operators (Shane Rose, s.rose@ahwvic.com.au, 2004-12-06)
• dover t3 problem (ralph bertolli, robbo1026@hotmail.com, 2004-12-05)
• Advantage of DC door operator (S.Sivakumar, ssivakumar@sesmt.com, 2004-12-04)
• tach repair (willy, blmremax@aol.com, 2004-12-02)
• Hydraulic pulsing (norm swan, norm@nospam.com, 2004-12-02)
• Dumb Waiter Limiter Switches (William Jordan, jordanw@ntcna.nissan-usa.com, 2004-12-01)
• City of Detroit Elevator Code 2003 (Wayne Miller, waynem@gunnlevine.com, 2004-11-30)
• looking for a wiring diagram for a microlift dumbwaiter (fiona conte, fionaconte@msn.com, 2004-11-23)
• Mathis PC boards (Clark, pdell200@comcast.net, 2004-11-21)
• ESCALATOR STEP CLEANING PROBLEM (Vatorman205@aol.com, 2004-11-21)
• OTIS MRV deflector sheave (Tom, tisacs@deltaelevator.com, 2004-11-20)
• Failed Sedgwick Controller (Fred Moeller, fred@moellerassociates.com, 2004-11-19)
• Residential Elevator prints GMV Type 3010 (Kevin Frawley, LFRAW82893@aol.com, 2004-11-16)
• Stannah Stairlift prints (Barry Duquette, bduquett@mnsi.net, 2004-11-16)
• SPR circuit on MRVF controller (Jim Bass, ollieagain@hotmail.com, 2004-11-16)
• DMC Hydro needs reprogramming every power outage (Renee Neal, rneal@tellurian.com, 2004-11-16)
• Freefall Up: Fatality in Detroit (Gary Bouwkamp, gbouwkamp@gmail.com, 2004-11-16)
• DMC Hydro needs reprogramming every power outage (Renee Neal, rneal@tellurian.com, 2004-11-15)
• Westinghouse Numalogic Plc Board Prints Needed (Jim, elevator555@hotmail.com, 2004-11-13)
• Failure Analysis Burning (Noel, noel.takahara@meus.mea.com, 2004-11-11)
• Otis 211 info? (Andy Englehart, aenglehart@world-electronics.com, 2004-11-11)
• Do you need a DMC1 Service Tool (John Varick, sales@dmcelevator.com, 2004-11-10)
• Need Schematic for Seaberg Controller (Sayre Anthony, info@clocktowerproperties.com, 2004-11-09)
• Orona lift electrial drawings (Stephen Nankivell, sales@belviderelifts.co.uk, 2004-11-09)
• mrl elevator (karimtalaat, talaat_karim@hotmail.com, 2004-11-06)
• 2 stop Dover wire contact (Clark, pdell200@comcast.net, 2004-11-04)
• Canada/ Nova Scotia Mechanics or Jobs (Richard, rnconduit@postmaster.co.uk, 2004-11-03)
• Otis MRQ "MTC" status (!@#$%, elevatorpr2000@yahoo.com, 2004-11-02)
• otis211 problem (ralph bertolli, robbo1026@hotmail.com, 2004-11-01)
• Dumbwaiter shaft Fire Rated? (Dena, ddearborn@graham-meus.com, 2004-11-01)
• Dover DMC (Jim, elevator555@hotmail.com, 2004-11-01)
• Operation elevator with MC's8051 (soai duc ninh, soaiducninhvn@yahoo.com, 2004-10-30)
• jobs (kvs, groucho9@aol.com, 2004-10-29)
• PLC elevator (Marco Mazzei, enkajuventino@msn.com, 2004-10-29)
• fujitec pwr board (pete williams, pwuk@blueyonder.co.uk, 2004-10-28)
• Otis Escalator Steps Replacement Responsibility (r a m, projectconsultants@yahoo.com, 2004-10-27)
• TAC 20 W/customer tool (John, elvtech@hotmail.com, 2004-10-27)
• hydraulic elevator with an elex control and GMV valves (antonio m domantay, jksa_joshua@yahoo.com, 2004-10-25)
• Software (K.Selvam, bac777@emirates.net.ae, 2004-10-24)
• wireing old westinghouse (Ray Losego, appleptg@comcast.net, 2004-10-23)
• Repair Supervisor in Bournemouth (Chris Cleaver, chris_cleaver@hotmail.com, 2004-10-22)
• Semag door timer board (V.Karigiri, vijayanarayana.karigiri@otis.com, 2004-10-21)
• Semag door timer board (V.Karigiri, vijayanarayana.karigiri@otis.com, 2004-10-21)
• ELEVATOR ROLLERS (Mark Johnson, mark@pcourethane.com, 2004-10-21)
• Does anyone know any decent lift refurb companies (Ian Mustoe, ian.mustoe@leighspaints.co.uk, 2004-10-20)
• MICROVERT (martin baker, mxxbaker@yahoo.com, 2004-10-20)
• Need Software Tool for Otis Gen2 elevator!? (Kalle Grabowski, Interatom@web.de, 2004-10-19)
• Sedgwick Residential Elevator for Sale (Kim Spencer, Kim_r_spencer@yahoo.com, 2004-10-19)
• Storm Drain Pipe in Elev Mch Room? (Larry Thomas, lthomas@tesengineering.com, 2004-10-19)
• Dirty Hoist Ropes (Jim, elevator555@hotmail.com, 2004-10-19)
• Sheppard Home Lift (Steve, stoteda@pacbell.net, 2004-10-18)
• Kone E-line Controller info needed (Lenny the Lift, theliftman@hotmail.com, 2004-10-18)
• sensors (marco, marco.mazzei@pandora.be, 2004-10-18)
• How much should it cost to replace a motor (Doug, dougwinfield@hotmail.com, 2004-10-15)
• we are looking for a ziehl abegg elevator motor (paul dupuis, distmarley@hotmail.com, 2004-10-15)
• dover sync problem (Cliff, cliff77@att.net, 2004-10-15)
• Miprom 21 - 60 fault (Brian Nichols, bkn411@comcast.net, 2004-10-14)
• Dover LHM or LMH (Dan, justsomeguylookin2@hotmail.com, 2004-10-13)
• Higdon (waeio, waeio2004@yahoo.com, 2004-10-13)
• feasibility study (karim talaat, talaat_karim@hotmail.com, 2004-10-12)
• Inexpensive Construction Intercom (Jim, elevator555@hotmail.com, 2004-10-12)
• Help in locating a used Generator for (Kelly Kinard, kgkinard@abilene.com, 2004-10-11)
• model 5 elc (fixalift, fixalift@yahoo.com, 2004-10-09)
• Fracture of Drive shaft (Howard Medoff, hpm1@psu.edu, 2004-10-08)
• US 1220/1230 Ascension 1000 - boards for sale (US PARTS FOR SALE, smallbuyer@flex.com, 2004-10-06)
• Dover Solid State Hydros (Jim, elevator555@hotmail.com, 2004-10-06)
• Auto CAD (Phil, ledgard.services@bigpond.com.au, 2004-10-05)
• Race To The Top (Jim, elevator555@hotmail.com, 2004-10-04)
• Suppliers of Dumb Waiters in Spain (Nicholas Christie, nicholaschristie@hotmail.com, 2004-10-03)
• Sistel Smart Lift 9809 Printed circuit board (Vinayak V Yengul, vinayak_yengul@hotmail.com, 2004-10-02)
• Extra work PT Long Island/NYC (PlasmasEx, plasmasex@hotmail.com, 2004-10-02)
• otis LRV4 phase2 fire key switch (ralph bertolli, robbo1026@hotmail.com, 2004-10-01)
• Owner/Operator Elevator Company's (onlylogic@yahoo.com, 2004-09-29)
• Weight Formula of Spool of Wire Rope (Jim, elevator555@hotmail.com, 2004-09-28)
• Hoist Rope Socket Resin vs Babitt (Jim, elevator555@hotmail.com, 2004-09-28)
• TAC 20 & Thyssen elevator spare parts. (Carlos Cabrera, fatepsa@yahoo.com, 2004-09-23)
• Is Overrating of Contactors Normal? (Noel Takahara, noel.takahara@meus.mea.com, 2004-09-22)
• elevator brake sleave (Lisa Kotrba, kotrba.l@comcast.net, 2004-09-22)
• Regarding CET (Lakshmanan Raja, rajas73@hotmail.com, 2004-09-20)
• Oldest working high-rise lifts in New York or Chicago (Roger Parsons, roger.parsons@bbc.co.uk, 2004-09-20)
• Thompson prints needed (joe gold, joegold@cybernex.net, 2004-09-16)
• Door Gauge (William J. Bunch, jeffbunch@comcast.net, 2004-09-15)
• Otis 20 NICLS (Bob Oaks, tzinger3550@yahoo.com, 2004-09-14)
• Error Codes for Kone Monospace and Minispace (Nathan Miller, dashafamily@bigpond.com, 2004-09-12)
• elevator web discussion (charles Burtin, Trollboys@aol.com, 2004-09-12)
• DOVER T2 RSM FAULT (JIM O'BRIEN, ELEVJOB@AOL.COM, 2004-09-09)
• dover dmc reed switch (ralph bertolli, robbo1026@hotmail.com, 2004-09-09)
• Dover DMC 1 and 2 Differences (Brian, m428rl@hotmail.com, 2004-09-09)
• LOOKING FOR 6300FX4 & 6300FX4 DOVER BOARDS (paul dupuis, distmarley@hotmail.com, 2004-09-08)
• Adding Rope Brakes For A Mod (Jim, elevator555@hotmail.com, 2004-09-08)
• HDPE or PVC Casing and Monitoring (Jim, elevator555@hotmail.com, 2004-09-07)
• EN-81 Class of goods Elevators (mo_is2@hotmail.com, 2004-09-07)
• Dover Prints (Clark, pdell200@comcast.net, 2004-09-06)
• Looking For Contact Info CC Elevator in New York (Jim, elevator555@hotmail.com, 2004-09-06)
• recent NY fatality (geoff judge, geoffjudge@bchtroup.org, 2004-09-02)
• megatech digital dc drive (norm, spam@notwanted.com, 2004-08-31)
• Need Temporary Intercom Idea (Jim, elevator555@hotmail.com, 2004-08-30)
• US Ascension 1000 information (John Anthony, mentar43@yahoo.com, 2004-08-30)
• bent rod (Tony M, tony.mascarenas@gmail.com, 2004-08-30)
• Acronym meaning (John Brannon, akelevman@aol.com, 2004-08-28)
• Need Reeds for Dover PC Board Reed Relays (Jim, elevator555@hotmail.com, 2004-08-28)
• need eagle signal controls timers (distmarley@hotmail.com, 2004-08-27)
• Dover/Thyssen technicians (Tony, tony.mascarenas@gmail.com, 2004-08-26)
• Safeties on hydraulics (Jim Kay, mrkay6861@hotmail.com, 2004-08-26)
• Montgomery ES-5000 fault reset (Nic, i614rockinrocka@aol.com, 2004-08-25)
• jumping on the elevator (Jala, menzz@hotmail.com, 2004-08-25)
• pregunta (ascensorista, ivamago@hotmail.com, 2004-08-21)
• Jobs (Harry, harry@bhua.co.uk, 2004-08-20)
• what's wrong with the site? (me, whobwho@yahoo.com, 2004-08-20)
• Miprom hydro power board question? (me, whobwho@yahoo.com, 2004-08-19)
• hydraulic in free fall (Jobocop, machecatz@hotmail.com, 2004-08-19)
• syracuse timer (distribution marley, distmarley@hotmail.com, 2004-08-19)
• Elevator information (marco mazzei, enkajuventino@msn.com, 2004-08-19)
• Dover t3 (Chris Elevatorman, bidman477@juno.com, 2004-08-18)
• ASME A17.1 2004 Code Book (Jim, www.elevator555@hotmail.com, 2004-08-17)
• U.S. Embassy Elevator Tech Work (Brian Fleming, paemoscow@paegroup.com, 2004-08-17)
• "American Standard Safety Code for Elevators" (Jan Schuffman, jan.schuffman@nashville.gov, 2004-08-17)
• hydraulic elevator question (Jobocop, machecatz@hotmail.com, 2004-08-16)
• Is there such thing called after-market replacement part for elevator/escalator? (dog, tradingdog@hotmail.com, 2004-08-16)
• Home lifts (Phil Ledgard, ledgard.services@bigpond.com.au, 2004-08-16)
• where can i find (yaniv, yanivchuck@walla.co.il, 2004-08-13)
• Where can I get a copy of controller diagram for an Old Otis Elevator Model 10UCL (Willie Chua, advance@info.com.ph, 2004-08-13)
• consejo (lobo, salvamar639639@hotmail.com, 2004-08-13)
• Prints missing from jobs (Macky, Macky@sciti.com, 2004-08-11)
• VVVF for Permenant Magnet Syncronous motor (S.Sivakumar, ssivakumar@sesmt.com, 2004-08-11)
• Motor Gen set output voltage (dt, texmarvin@aol.com, 2004-08-11)
• TMS 200 & OVF80 (Ottavio, o.crasan@tin.it, 2004-08-07)
• GE Series One Plc Communication CPU101 (Jim, eleator555@hotmail.com, 2004-08-04)
• tms 500 (bob, bob.morgan@blueyonder.co.uk, 2004-08-04)
• need some thames valley parts (distribution marley, distmarley@hotmail.com, 2004-08-03)
• New Hydraulic Jack Spec. (Jim, elevator555@hotmail.com, 2004-07-29)
• Westinghouse Elevator Beeping Noise (Lisa, lisagzimmer@hotmail.com, 2004-07-28)
• U.S. MP 1200 (joe, jojojojo57@hotmail.com, 2004-07-27)
• Otis Gen2 (Lee Jones, leejola@hotmail.com, 2004-07-27)
• rope wrapping machine (mo_is2@hotmail.com, 2004-07-26)
• Hydraulic Fires (Susan Bray, susanbray@lineone.net, 2004-07-26)
• Need a simple electrical diagram (re-lay and contactor type)for a 4 stop lift (Qamberali, qamberali@yahoo.com, 2004-07-25)
• Rope traction calculations (Ian Rideout, siamoffs@loxinfo.co.th, 2004-07-23)
• Wiring Diagram for Miami elevator circa: 1982 (Mark Ahrens, markahrens@orlandolaw.com, 2004-07-22)
• ESI door interlocks (Denise, deni@pacbell.net, 2004-07-20)
• Missing set screws on leveling shunt relay (Hue Henry, jhhpc@bellsouth.net, 2004-07-20)
• Built in 1910 by Elevator Specialty Co (Eric Thomson, started11@yahoo.ca, 2004-07-19)
• Dover T4 communication (Jim, elevator555@hotmail.com, 2004-07-18)
• Hidral food lift wont stop at middle floor (Andy, dxing70cms@aol.com, 2004-07-18)
• yaskawa drives (jesus rubio, jrnoel11@hotmail.com, 2004-07-15)
• Epoxy Etc instead of babbit (Dan, justsomeguylookin2@hotmail.com, 2004-07-12)
• Monospace PCB (Hustachy, JFH_912@hotmail.com, 2004-07-12)
• being agent of Hitachi elevator in IRAN (JAFAR YARANDI, info@tecsaco.com or tecsaco@emirates.net.ae, 2004-07-10)
• swift futura problem (ralph bertolli, robbo1026@hotmail.com, 2004-07-09)
• Supply voltages used overseas (dt, texmarvin@aol.com, 2004-07-08)
• felt wick lubricator (Clayton, cschon@hydro.mb.ca, 2004-07-08)
• Elevator Phones (Hubert Johnson, venice9999@aol.com, 2004-07-08)
• U.S. Embassy Elevator Tech Work (Brian Fleming, paemoscow@paegroup.com, 2004-07-07)
• Looking for the source of Rope tension control (Thanny, bokim4210060@hotmail.com, 2004-07-07)
• elevator expert exchange (dayle, daylebrenda@iprimus.com.au, 2004-07-06)
• Considering installing a Dumbwaitor (Mary DeBella, mary_debella@comcast.net, 2004-07-06)
• Southeastern Valves (John Smith, birder@cableone.net, 2004-07-05)
• Dover SS5 P board (Rob Wagner, rwagner@can.fujitec.com, 2004-07-05)
• Amtech Reliable hydro (Christopher, cawilliams956@sbcglobal.net, 2004-07-03)
• Your Local Electronic Swap Meet (Jim, elevator555@hotmail.com, 2004-07-01)
• AMD Wittur Door operator 2.0 (Jim, elevator555@hotmail.com, 2004-06-30)
• IEE Old Projector Type PI (Jim, elevator555@hotmail.com, 2004-06-27)
• WTB CNIM Escalator Steps (Peter, en81en81@yahoo.com.hk, 2004-06-26)
• expecting your help (Lakshmanan Raja, rajas73@hotmail.com, 2004-06-25)
• ANSI / ASME SAFETY ELEVATORS CODES (Syed A. Qureshi, qureshi_244@yahoo.com, 2004-06-24)
• Looking for a preowned residential elevation in NH w/ installer (Eric T., ethoman2001@yahoo.com, 2004-06-24)
• how far do u go (annonimus, mikes2675@yarhoo.com.au, 2004-06-24)
• I 'm looking for the EN 81 Book . Where can i find it? (Miss Thanyarat Ungprapakorn, bokim4210060@hotmail.com, 2004-06-23)
• Otis 63GA Gen part (Dan, justsomeguylookin2@hotmail.com, 2004-06-22)
• What regulations apply to computer monitor glass mounted in an elevator? (Carl Newton, cnewton@xycom.com, 2004-06-22)
• Emergency phones (Greg Walker, gwallaia@yahoo.com, 2004-06-21)
• helpmeplease (petersmith, unrealdexter@hotmail.com, 2004-06-21)
• I need an electrical schematic for a Westinghouse elevators serial #'s 11406A1, 11406B2, 124961, 124962 (francisco perez, francisco.perez2@samhouston.army.mil, 2004-06-21)
• Ride comfort measurements in elevators (Lutfi Al-Sharif, al_sharifvtc@compuserve.com, 2004-06-21)
• Imperial Generators (Jim, elevator555@hotmail.com, 2004-06-18)
• What Happend to the Site (Jim, elevator555@hotmail.com, 2004-06-18)
• Repair / location stories (Brian, downtown717@excite.com, 2004-06-15)
• Miprom21 problem (Clark, pdell200@comcast.net, 2004-06-12)
• Door Reopening Device Timing (Wade Smith, wades17@cox.net, 2004-06-06)
• Comparison between Gear and Gearless Machines (Qureshi, qureshi_244@yahoo.com, 2004-06-04)
• Northern 9000 Control (Jim, elevator555@hotmail.com, 2004-06-04)
• ADA Codes (Jim, elevator555@hotmail.com, 2004-06-03)
• US Elevator 1200 codes (russ, pequod67@yahoo.com, 2004-06-03)
• MCE hydraulic VLT fault (Rodney Epps, rodepps@hotmail.com, 2004-06-03)
• otis 73 mg (Cliff, cliff77@att.net, 2004-06-02)
• Response to Collusion (John Saylor, Johnsaylor@aol.com, 2004-06-01)
• Need Diagrams for Payne Elevator Controller Approx 30 years old (Randall Pollock, webneb@hotmail.com, 2004-05-31)
• cavitation sound from Maxton valve when the car is bypassing (joe, whobwho@yahoo.com, 2004-05-28)
• VVVF SYSDRIVE (ISALI, silent_sound4u@yaoo.com, 2004-05-26)
• Thyssen POME Tool (Joe Sidmouth, joeelevators@yahoo.com, 2004-05-24)
• bypass on a "401" (Chris Uvyn, chrisuvyn@skynet.be, 2004-05-22)
• Ideal controls (Clark, pdell200@comcast.net, 2004-05-21)
• Dover Home Lift (Gigi Bebawi, gigi@brianhenson.com, 2004-05-21)
• Solid state esco (fixalift, fixalift@yahoo.com, 2004-05-20)
• U.S. Elevator Corp. Ascension problem (garnik derian, gkderian696@aol.com, 2004-05-19)
• ORONA Elevators (Isamil, mee_elevators@mail2world.com, 2004-05-19)
• low 24 vdc on Dover oildraulic (joe, whobwho@yahoo.com, 2004-05-18)
• looking for programming instructions for westinghouse t2l (max smelser, mcsmelser@oppd.com, 2004-05-18)
• Elect. diag. for Westinghouse Elevator (Ray l engle, uplandmanor@earthlink.net, 2004-05-17)
• Collusion (John Saylor, Johnsaylor@aol.com, 2004-05-17)
• Salish Control Support (Jim, ELEVATOR555@HOTMAIL.COM, 2004-05-17)
• Dover Home lift (Jon, jkh824@comcast.com, 2004-05-17)
• Terms (Niels Voigt, nivoigt@yorkref.com, 2004-05-14)
• WTB Ascension 1000 Boards (Mike Gibson, mike@plasticrevolutions.com, 2004-05-13)
• Preowned elevator for home - commercial ok (Eric T., ethoman2001@yahoo.com, 2004-05-13)
• Westinghouse floor passing chime (Joe Jester, jest1@pacbell.net, 2004-05-12)
• Kone Elevators Resolve 100 (Geoff Smith, jca@accsoft.com.au, 2004-05-11)
• Kramer Door Motors (Ray Harvey, ritchie.hart@charity.vfree.com, 2004-05-10)
• Armor Mark 5 Dispatching trouble (Jim, elevator555@hotmail.com, 2004-05-06)
• Otis 211 Controller (Don Pfuntner, dgelev3@frontiernet.net, 2004-05-06)
• 3ft x 4ft platform to be lifted up & dowm by hand pulley arrangement (jgboyce, office@karlie.com, 2004-05-05)
• ASME NEEDED (Shankar, l_shankar41@hotmail.com, 2004-05-04)
• Elevator Disc Brakes E A Foulds England (Jim, elevator555@hotmail.com, 2004-05-01)
• Otiswave (joeotis, jojojojo57@hotmail.com, 2004-05-01)
• Elevator Schematic (dolores cotten, dolores@v9inc.com, 2004-04-30)
• Thanks a billion (Dan, spursfreek@yahoo.com, 2004-04-30)
• Elevator acceleration (Giselle, n_prenom@hotmail.com, 2004-04-28)
• software to replace otis tool (frederik huys, frederik.huys@belgacom.net, 2004-04-26)
• MPH II (waeio, waeio2004@yahoo.com, 2004-04-25)
• Water Elevator (Dan, Spursfreek@yahoo.com, 2004-04-25)
• fair and efficient elevator designs (Murat, matlamaz@hotmail.com, 2004-04-23)
• Looking for a job - willing to relocate. (Lakshmanan Raja, rajas73@hotmail.com, 2004-04-22)
• PAE Elevator Tech Work at the U.S. Embassy in Moscow (Brian Fleming, paemoscow@paegroup.com, 2004-04-21)
• 1950's Armor Elevator Parts (Dolores Cotten, dolores@v9inc.com, 2004-04-21)
• Elevator Maintenance Mechanic Job Opening (Brent Manthorne, bmanthorne@hotmail.com, 2004-04-18)
• Semag - Hoistraco Parts (Robert Taylor, rob.taylor@21stcenturylifts.co.uk, 2004-04-16)
• Looking for Thames Valley Controller parts or drawings? (Eamonn Reid, eamonn.reid@virgin.net, 2004-04-16)
• Liftbay (Hans, elevator-mechanic@web.de, 2004-04-15)
• Dover G3a Gearless Arm Shaft repair Bulliten Needed (Jim, elevator555@hotmail.com, 2004-04-13)
• Dover G3A Geerless machine armature needed (Jim, www.elevator555@hotmail.com, 2004-04-12)
• Hydraulic Elevator Life Expectancy (Jennifer Heck, jennifer@northlaw.com, 2004-04-12)
• elevator simulation (Subramaniam, lsubbu@coe.neu.edu, 2004-04-12)
• Cost of dumb waiter (Michael Meyer, nefmtg@aol.com, 2004-04-11)
• Age of ESCO hydro (Jim Boxmeyer, jboxmeyer@elevatorpro.com, 2004-04-11)
• Otis Gen2 (Marcel, ncc1502@yahoo.co.uk, 2004-04-09)
• OTIS TOOL (Elevatorpr2000@yahoo.com, 2004-04-08)
• Kone KNX board (Marcel Palmen, ncc1502@yahoo.co.uk, 2004-04-08)
• swift 5000 (john, kanthackj@aol.com, 2004-04-08)
• Esco Elevator Unit ID 8175 - Need HELP Please!!! (Betsy Shank, propertycoordinator@ppmproperties.com, 2004-04-07)
• europen lift standard or norme (younes yaman, yyaman@saudioger.com, 2004-04-07)
• westinghouse elevators (phillip geer, geergeerco@aol.com, 2004-04-06)
• Kone New Product Maxi Space (Jim, elevator555@hotmail.com, 2004-04-05)
• SEMAG - hydraulic - Genius (Rob, elevtronic@hotmail.com, 2004-04-05)
• Used Elevator (Richard Rodrigo, rickrodrigo@cfl.rr.com, 2004-04-04)
• Load test on an Escalators (mo_is2@hotmail.com, 2004-04-01)
• Montgomery Esculator Chain (randy, tkeelavator@hotmail.com, 2004-03-31)
• Otis leveling problem (ted Greenwood, info@bo-rent.com, 2004-03-30)
• levelling problems (lawrence, samuellmgd@yahoo.com, 2004-03-30)
• ThyssenKrupp Hydro Cylnder Water Sensor (Jim, elevator555@hotmail.com, 2004-03-30)
• levelling problems (lawrence samuel, samuellmgd@yahoo.com, 2004-03-29)
• fujitec mic 310 (pete williams, pwuk@fsmail.net, 2004-03-27)
• kone spare part (younes yaman, yyaman@saudioger.com, 2004-03-27)
• Vendor Needed for Elevator Mod. (michael, sjocsmg@charter.net, 2004-03-26)
• Wire Rope Cleaner and Lubricator (Jim, elevator555@hotmail.com, 2004-03-25)
• Esco Elevator Cylinder Head Safety Bulletin (Jim, elevator555@hotmail.com, 2004-03-25)
• Rooftop Communication Equipment Hazards (Jim, elevator555@hotmail.com, 2004-03-25)
• All hydraulic gearless & geared machines (Mathew Bailey, bhm0875@exp.net, 2004-03-24)
• Traction Problem Otis 269HT (Rick Owens, richard.e.owens@usa-spaceops.com, 2004-03-24)
• Dover DC 68 operator (Mike Gibson, mike@plasticrevolutions.com, 2004-03-23)
• o. THOMPSON LIMIT BOARD TRIPS (GARY NEWMAN, GN81953@AOL.COM, 2004-03-22)
• Problems with balance ropes (Hans, elevator-mechanic@web.de, 2004-03-19)
• How to Joint Escalator Handrail (Sumarno, sumarno9@yahoo.com, 2004-03-19)
• Hydro Cylinder Pumps (Jim, elevator555@hotmail.com, 2004-03-18)
• Machine Room Heat Detector Code Referance (jim, elevator555@hotmail.com, 2004-03-18)
• Baker Hotel elevator accident (Mathew Bailey, bhm0875@exp.net, 2004-03-17)
• Two rams equalization (David Touito, david.touito@isralift.co.il, 2004-03-15)
• kleemann 75 fault (jeff, jgarvin@oputsnet.com.au, 2004-03-14)
• New elevator help (Duilio Ramallo, ramallo@comcast.net, 2004-03-13)
• Horsepower of AC elevator (Dan, Texmarvin@aol.com, 2004-03-13)
• Kieckhefer hydraulic elevator (Jeff Scherer, ra@centurytel.net, 2004-03-13)
• VERTITRON Parts +Prints Needed (Jim, elevator555@hotmail.com, 2004-03-11)
• Sedgewick Machine Works Drawings (Dean Dasher, cowartsystems@bellsouth.net, 2004-03-10)
• Thyssen Omega rails (Roy Nystrom, RoyNystrom@aol.com, 2004-03-10)
• Field test (mo_is2@hotmail.com, 2004-03-09)
• Nikola Tesla (Jim, elevator555@hotmail.com, 2004-03-07)
• Miprom motor field adj. (Clark, pdell200@comcast.net, 2004-03-05)
• Rope compensation (Inaki, inawasp@euskalnet.net, 2004-03-05)
• Old Otis Elevator O-type door operator (Deborah King, WellsInn@hansgen.org, 2004-03-03)
• Esco Elevator parts (SHELLY JOHNSON, receptionists@travelleadergroup.com, 2004-03-02)
• Financing for elevator MOD (dss4me4@msn.com, 2004-03-02)
• Pickerings Machine room less lift (steve fairclough, steve.fairclough@dsl.piex.com, 2004-03-02)
• Haughton Control Series (Jim, elevator555@hotmail.com, 2004-03-02)
• Shunt Trip (Mark, MarkVator@comcast.net, 2004-03-01)
• used us 1220 brds (me, whobwho@yahoo.com, 2004-02-29)
• Remove Water from Hydro Oil (Jim, elevator555@hotmail.com, 2004-02-29)
• Otis Gama D Circa 1992 For Sale. Interested (woodstock, sburdy@skyweb.ca, 2004-02-26)
• Otis 211 wcc fault? (Chris Hayes, hazerama@hotmail.com, 2004-02-26)
• car call not latching on U.S 1220 (mack, relaylogic@sciti.com, 2004-02-24)
• Miprom/MegaTech in overhead-Pit (Dave Moore, sito211@hotmail.com, 2004-02-23)
• HYDRO OIL (Jim, elevator555@hotmail.com, 2004-02-23)
• Double Bottom Hydro Cylnders (Jim, elevator555@hotmail.com, 2004-02-22)
• Miprom hs (Lee, armetia@chartertn.net, 2004-02-19)
• ELEX LIFTS MILIAN SRL (Tadhg Buckley, tadhg@bbselevators.com, 2004-02-19)
• ELEX LIFTS MILIAN (Tadhg Buckley, tadhg@bbelevators.com, 2004-02-19)
• sedgwick elevator (Leanne Hopkins, tigrrfan@yahoo.com, 2004-02-18)
• elevonic 411M controller for sale (Allen Rodgers, chvyman_83@hotmail.com, 2004-02-17)
• Dover omega rails (Blair Strehorn, wbstrehorn@sbcglobal.net, 2004-02-17)
• Equipment for 5.0m/s (Harrison Li, harrisonli@elex.com.hk, 2004-02-16)
• GE,TI,Siemens,Koyo Series One Plc Software Needed (Jim, elevator555@hotmail.com, 2004-02-15)
• self built elevator (james maberry, jmaberry@sbcglobal.net, 2004-02-14)
• dover T-3 (tj, elevatetj@comcast.net, 2004-02-12)
• Elevator Co Business Plan (Jim, www.elevator555@hotmail.com, 2004-02-11)
• Has anyone heard about ThyssenKrupp closing US mfg plant? (Richard Noggin, TKplantworker@yahoo.com, 2004-02-10)
• Ogura brake for Continental escalator (Rob Wagner, rwagner@can.fujitec.com, 2004-02-10)
• Westinghouse 212 machines (Rob Wagner, rwagner@can.fujitec.com, 2004-02-10)
• What permits are required for an ADA upgrade? (joe, joe@yahoo.com, 2004-02-06)
• Elevator Movie, The Lift, The Shaft (Jim, elevator555@hotmail.com, 2004-02-05)
• Should you look? (Tijmen de Haan, tijm6140@hotmail.com, 2004-02-03)
• Otis roller guide wheels rubber goo on rails (Jim, elevator555@hotmail.com, 2004-01-30)
• 6 Program Otis Starter Panel (Jim, elevator555@hotmail.com, 2004-01-30)
• Montgomery Traction (Jon, jkh824@comcast.net, 2004-01-29)
• miprom/Mega-Tech info (Clark, pdell200@comcast.net, 2004-01-28)
• SEMAG-HOISTRACO spare parts (jocondor63@yahoo.it, 2004-01-28)
• Questions about elevators (Jonas Karlsson, i97kajo@itek.chalmers.se, 2004-01-27)
• circuit diagram for Siminor SC6402 (wong, wmwongm88@yahoo.com, 2004-01-26)
• Swift Futura Software (Kevin Hunts, kevhunts@hotmail.com, 2004-01-25)
• Looking for Explosion proof intercom for elevator (Sanouk CHOUNLAMANY, sanouk@techemail.com, 2004-01-23)
• miprom hydro won't latch calls? (fred, E@yahoo.com, 2004-01-21)
• mce MLT faults frequently (jeff garvin, jgarvin@oputsnet.com.au, 2004-01-20)
• Old Otis Schematics (Don Pfuntner, dgelev3@frontiernet.net, 2004-01-20)
• Old Elevator Schematics (All types) (Don Pfuntner, dgelev3@frontiernet.net, 2004-01-20)
• spare partrs of Otis elevator (mehdi, karouimba@yahoo.fr, 2004-01-20)
• Sedgwick elevator (matt, matt@plumbracing.com, 2004-01-19)
• --elevatorphobia-- (Alec, look--yougotmail@sbcglobal.net, 2004-01-14)
• Elevator braking system (Taha Patoli, patolit@muss.cis.mcmaster.ca, 2004-01-14)
• Sample QEI study questions (Dan, justsomeguylookin2@hotmail.com, 2004-01-14)
• Turnbull Elevator electric schematic (Hy Holz, HHolz67983@aol.com, 2004-01-12)
• US - 1200MDU control info (Jan Testin, osteopanfish@interfink.net, 2004-01-08)
• A17.1b-2003 effective date (Marvin Delgado, marvin_delgado@hotmail.com, 2004-01-08)
• DMR selsyn motor clutch trouble (Jim, elevator555@hotmail.com, 2004-01-06)
• Worlds Longest Escalators (Jim, www.elevator555@hotmail.com, 2004-01-04)
• Repair Work Scheduling (jim, elevator555@hotmail.com, 2004-01-02)
• energy efficient elevators (Betsy Jenkins, bjenkins@powerconcepts.com, 2003-12-31)
• Otis button IC GBA 616BW (Ammar Ka, ammarabu@emirates.net.ae, 2003-12-30)
• what is a maintenance adjustor?? (paul lacey, pielacey@hotmail.com, 2003-12-29)
• VINTAGE FIXTURES / PUSH-BUTTON STATIONS (Jan, elevatormuseum@aol.com, 2003-12-27)
• What are the components of the microprocessor used in the elevator control panel& how can it be programed? (Hend Maher Matar, matar_1981@hotmail.com, 2003-12-24)
• Dover com problems (kevin mccreadie, kmccreadie@ozemail.com.au, 2003-12-21)
• Did we get ripped off for repair work on Dover solid state hydro? (John Park, jjpark6@hotmail.com, 2003-12-20)
• searching for electro-mechanical relays (laszlo regos, laci@brandx.net, 2003-12-17)
• Eiffel Tower (Jim, www.elevator555@hotmail.com, 2003-12-15)
• Need adjustment info on Dover's Closed Loop Board (Bill Jackson, otisonbrand@sbcglobale.net, 2003-12-15)
• World's Fastest elevators (arno, arno@drcorbeille.ch, 2003-12-11)
• how can i design a system control of elevator for 4 floors ? (arvin faiazi, arvineto@yahoo.com, 2003-12-09)
• Dover Orange Cords (Luke Skywalker, elevatorman@iname.com, 2003-12-08)
• Hydraulic lift vs. dumb waiter (Stuart Hata, smhata@famsf.org, 2003-12-05)
• Otis Goolean Logic Controlers (Jim, elevator555@hotmail.com, 2003-12-04)
• 6 Pulse or 12 Pulse Drives IEEE519 (jim, elevator555@hotmail.com, 2003-12-02)
• paternoster elevator system (J.Y. Pang, flying_aeroplane@yahoo.com, 2003-12-02)
• Elevator accident rates (Joe Marshall, jrm@ccs.neu.edu, 2003-12-01)
• Sending DTMF digit through Procomplus (Thomas George, babukv99@yahoo.com, 2003-12-01)
• pls. URGANT ....I need a copy of an EN-81 (Fadi Raslan, fadi@raslanliftsco.com, 2003-11-30)
• where i can get mitsubishi elevator replacement parts (Selvam, bac777@emirates.net.ae, 2003-11-25)
• elevadores no brasil (peterson, petmec@hotmail.com, 2003-11-23)
• door time canceled (ricko, rwashington@lerchbates.com, 2003-11-20)
• Safety in future drive systems for elevators (Zied M'nasri, zied_m_nasri@ch.schindler.com, 2003-11-17)
• DMC tool (Fred S, shenk@optonline.net, 2003-11-14)
• Westinghouse type "E" Door operator (fxstd, v8tor@hotmail.com, 2003-11-14)
• Request for help from australian colleagues (Ian Gjorgjiev, ivica@elevatorscontrol.com, 2003-11-14)
• Levelling problem on a KONE Monospace (Steven FAirclough, steve.fairclough@dsl.pipex.com, 2003-11-13)
• SPARE PARTS FOR SABIEM ELEVATORS/WARD-LEORNAD SYSTEMS (Boogie Frank Raymond, yurke2001@yahoo.com, 2003-11-12)
• Which to buy (hugh s. parnell, hparn61658@aol.com, 2003-11-11)
• Escalator (gregory perello, gregory_perello@us.schindler.com, 2003-11-11)
• KONE Resolve (Joe Luongo, joe.luongo@otis.com, 2003-11-10)
• dynatron 2 (Peterson, petmec@hotmail.com, 2003-11-09)
• Deceleration speed (Kannan, mktkannan@yahoo.com, 2003-11-08)
• Preventive Maintanance programs for PDA (Bill, v8tor@hotmail.com, 2003-11-04)
• Smartlift processor as supplied by Glode lift equipment from spain (Steven Fairclough, stev.fairclough@dsl.pipex.com, 2003-11-03)
• basement-traction/ selector question (Christopher, Parsifal96@aol.com, 2003-11-02)
• Where can I find a used reliable elevator in the US (Adolfo Balderas, adolfoabalderas@yahoo.com, 2003-11-02)
• Is there any problem in reverse the suspension ? (Fadi Raslan, fadi@raslanliftsco.com, 2003-11-02)
• how much torque is required for tighting bolts (ravi, rav22_m@yahoo.com, 2003-11-01)
• ASME A17.1 2000 ROPE BRAKES MODERNIATION (jim, elevator555@hotmail.com, 2003-10-30)
• emergency stop button (phil, transcriptiondna@hotmail.com, 2003-10-29)
• elevator with out machine room (john sylvestus, john_sylvestus@yahoo.com, 2003-10-29)
• Replacement call buttons/indicator buttons, 1 3/8" square dover/turnbull machine (ShaunParsons, ShaunParsons@mts.net, 2003-10-28)
• MEA controllers (Dave Peacock, dave@qlift.co.uk, 2003-10-27)
• Any truth to the rumor that Schindler US is trying to buy Kone in US ? (Clark Dell, pdell200@comcast.net, 2003-10-26)
• spare parts replace source (sumarno, sumarno9@yahoo.com, 2003-10-24)
• relays (bob smith, jaymmzzs@yahoo.com, 2003-10-20)
• Elevonic 401 ppt (Bagby Elevator, chvyman_83@hotmail.com, 2003-10-16)
• inverted i / o (charles, trollboys@aol.com, 2003-10-15)
• Worlds Largest Elevator Convention Interlift 10-14-03 (Jim, www.elevator555@hotmail.com, 2003-10-10)
• Daldoss Controller Diagram (Wong, wmwongm88@yahoo.com, 2003-10-07)
• EVA 625 Software (menixie, menixie@cli.pt, 2003-10-07)
• Elevator-related job postings (Arno, relocator@hotmail.com, 2003-10-07)
• NAEC Elevator Convention 9-2003 Florida (Jim, www.elevator555@hotmail.com, 2003-10-07)
• New Kone Controller (A.Y., yatrofsky@earthlink.net, 2003-10-04)
• brakes (Kalela Komesa, komesakomesa@yahoo.com, 2003-10-04)
• Daldoss PLC (wmwong, wmwongm88@yahoo.com, 2003-10-02)
• PDA SW (menixie, menixie@clix.pt, 2003-10-02)
• Escalator Load Testing (Jim, elevator555@hotmail.com, 2003-09-28)
• inverter for gearless machine (Sanouk CHOUNLAMANY, sanouk@techemail.com, 2003-09-26)
• door restrictor installation (randy mcdonnell, randy_mcdonnell@hines.com, 2003-09-24)
• WORLD ELECTRONICS P.I. NEEDED (Jim, elevator555@hotmail.com, 2003-09-23)
• Sedgwick lifts (Jon, jkh824@aol.com, 2003-09-22)
• Sedgwick Lifts (Jon, jkh824@aol.com, 2003-09-22)
• MICOTROL is closed (Stefan Mueller, mueller@kw-aufzugstechnik.de, 2003-09-22)
• Technical question about instalating elevators (Fadi Raslan, fadi@raslanliftsco.com, 2003-09-21)
• EN-81- part : 2 (Fadi Raslan, fadi@raslanliftsco.com, 2003-09-21)
• elevator brakes (Kalela Komesa, komesakomesa@yahoo.com, 2003-09-18)
• TMS-50e Diagram (Giovani de Morais e Silva, konet@artpage.com.br, 2003-09-14)
• O.Thompson Millar Microflite (Justin Ward, liftfixer@hotmail.com, 2003-09-10)
• Kone MX32 with KCM831 (Brian Kohlhaas, bkohlhaas@aol.com, 2003-09-10)
• Dover Restrictive Clutch Parts (D-Man, Jeeim@aol.com, 2003-09-08)
• Tape reader for west .TTL (turner, tuscfr@aol.com, 2003-09-05)
• Maintenance Contracts (Mark J, mark@bob.com, 2003-09-04)
• acordian door replacement serial # KU2-P (Marianne Lowrey, gdebgurney@aol.com, 2003-09-03)
• Help, problem with a C.G.A2 Turbo 3000 (Lee Cooper, hammer_45@hotmail.com, 2003-09-01)
• Plc Program (Michael Moe, topol_m2003@yahoo.com, 2003-09-01)
• Westinghouse Sleave Bearings (jim, www.elevator555@hotmail.com, 2003-08-29)
• Doctor Decapitated In Elevator Accident (Kazuhiko Watanabe, wkazuhikojp@yahoo.co.jp, 2003-08-26)
• dumb waiter intsaller? (Erin MacGregor-Forbes, supply@portlandpottery.com, 2003-08-24)
• slip of wire ropes (Siamak Jarchi, jsiamak54@yahoo.com, 2003-08-23)
• FIRE SERVICE PHASE 2 QUESTION (jim, elevator555@hotmail.com, 2003-08-21)
• TMS 50A (RICKY GONZALES, RICKYGONZALES@AOL.COM, 2003-08-21)
• weco 28 machine (rickygonzales, rickygonzales@aol.com, 2003-08-21)
• Fire Service Phase 2 (J Cao, cronept@msn.com, 2003-08-20)
• conmutator damage M.G.set Leroy Somer (ruben segoviano jimenez, ruben.segoviano@idesa.mea.com, 2003-08-20)
• looking for parts (mouaid ahmad, mouaid@hotmail.com, 2003-08-17)
• ESCO - Stop and Limit Switch Assembly (Darcy Douglas, douglasd2@otis.com, 2003-08-11)
• Armor 1988 fixtures need raised clear cap ADA (JIm, elevator555@hotmail.com, 2003-08-10)
• escalator load testing (Jim, elevator555@hotmail.com, 2003-08-10)
• TC 181 controller shutdown (Shane, dkgranny@yahoo.com, 2003-08-09)
• moving walk (Yohan Eko Purnomo, h4nzz_81@yahoo.com, 2003-08-09)
• Spare parts for Otis Elevator (David Kao, davidkp@ms1.hinet.net, 2003-08-06)
• MCE (dayle, daylebrenda@iprimus.com.au, 2003-08-01)
• Company Eats Company... (Mark, MarkVator@comcast.net, 2003-07-31)
• MCE Brake Failure??????? (Donald Gurney, elevatorman97@hotmail.com, 2003-07-30)
• Daldoss microlift (Jon, jkh824@aol.com, 2003-07-28)
• Gear Problem in Autur Gear ( EM 70 ) (Mudassir Ahmed Hashmi, induselevators@hotmail.com, 2003-07-26)
• Firm tests everything but brakes on Coors escalator?? (Murray Charters, mcharters@novus-tele.net, 2003-07-25)
• Want to buy used Freedom tool and tech articals for dmc (joe, whobwho@yahoo.com, 2003-07-16)
• freight / passenger elevators (john, john@blackhoundgallerie.com, 2003-07-12)
• runnaway escalator (Don Vollrath, dvollrath@magnetek.com, 2003-07-10)
• REALLY OLD WESTINGHOUSE MANUAL CAR (Frank Nici, fxn351@aol.com, 2003-07-08)
• Does this do the Elevators good? (LP, lpascall@cogeco.ca, 2003-07-05)
• Pricing for pump (Darwin Watson, pwatson751@yahoo.com, 2003-06-30)
• ADC Door Operator (Steven Fairclough, wjwtwsmv@tiscali.co.uk, 2003-06-27)
• have no communication on a dmc 1 (bobby labarca, BBbytheshore@aol.com, 2003-06-26)
• POWER FEED LINES RINGING IN BLDG (jim vendetti, elevator555@hotmail.com, 2003-06-25)
• ESCO PLC DOOR TIMER ADJUSTMENT (jim vendetti, elevator555@hotmail.com, 2003-06-24)
• High-rise gearless elevators (Greg Weimholt, greg.weimholt@arup.com, 2003-06-24)
• lmcss saf fault (charles, trollboys@aol.com, 2003-06-20)
• MPH-II Block Operation??? (Andy Englehart, aenglehart@world-electronics.com, 2003-06-17)
• Westinghouse ERL compounding (Frank Nici, fxn351@aol.com, 2003-06-12)
• NOISE IN HIDRAULIC ELEVATOR (JOSÉ OTERO, OTERO@EZ-POA.COM.BR, 2003-06-12)
• 5 story apt. (Warner) elevator (mike hinton, mhinton@BURNIP.COM, 2003-06-10)
• Otis escalator (J W Choo, asiaelevatorshop@yahoo.com, 2003-06-04)
• tms600 scd overspeed (Jerome Ferro, jferro@erols.com, 2003-05-28)
• Otis LRV3 & LRV4L phase 2 lock up (Rick Olsen, rolsen@roelevator.com, 2003-05-27)
• elevator problem discussion (raif hakyemez, r.hakyemez@superonline.com, 2003-05-25)
• baxco elevator controller keyboard (Tandy 201) (Raymond C S Chai, mondchai@hotmail.com, 2003-05-19)
• Dover Hydraulic (Justin Ward, transitive@hotmail.com, 2003-05-19)
• 1996 used elevators (Paul Johnson, ohwell@lcia.com, 2003-05-15)
• How to build laptop to use like Otis service tools (Sumarno, Sumarno9@yahoo.com, 2003-05-14)
• Modification about Otis 200VF (with LCBII) ; Replace the otis inverter to branded inverter (Sumarno, Sumarno9@yahoo.com, 2003-05-14)
• SEMAG (Maarten de Vries, Maarten.DeVries@kone.com, 2003-05-12)
• Serge controller-- goes into upper limits (Andy Yatrofsky, agy@earthlink.net, 2003-05-09)
• serge "micro sensory" micro processor controller (ramon plata, platahilo@aol.com, 2003-05-09)
• Mitsubishi Elevator Error Codes (Thomas Quinn, tquinn@fujitecamerica.com, 2003-05-07)
• Ascension 2000 (Robert Pillath, mpillath@earthlink.net, 2003-05-07)
• dumb waiter sources (Frankie, froohpar@yahoo.com, 2003-05-07)
• i need circuit diagram of CPT350Z or M491MM! pin voltage (khalid mehmood awan, uksq_uk@hotmail.com, 2003-05-01)
• Otis Generator 83GA Diagram (Annabell Cooper, capelev@aol.com, 2003-04-29)
• Kone TMS 200 with Tac-5 inspection mode problem (Ottavio, o.crasan@tin.it, 2003-04-23)
• OTIS DBR Transistor Burn (Jose Luis Figueroa, jlfigue@hotmail.com, 2003-04-21)
• GE Funac OEM Password (Joe Wright, Sowright2@aol.com, 2003-04-19)
• Help old Sedgwick lift (Aric Davala, abdavala@aol.com, 2003-04-16)
• inverter vf10 telemechanique (Ottavio, o.crasan@tin.it, 2003-04-14)
• Gen2 - Otis (Ottavio, o.crasan@tin.it, 2003-04-14)
• Questions about elevators (Constantine Foundos, foundosc@msoe.edu, 2003-04-14)
• i need otis service tool emulator on pc (sebastian rodriguez, sebro@adinet.com.uy, 2003-03-28)
• Mallory elevator (ttscubanow@aol.com, 2003-03-28)
• Thyssen TAC 60 and TAC 22 (ttscubanow@aol.com, 2003-03-28)
• removal of cylinder in concrete. (ricko washington, ricko555@aol.com, 2003-03-25)
• installing pvc cylinder liners (Jim Boxmeyer, jboxmeyer@elevatorpro.com, 2003-03-23)
• Hollister Whitney Rope Grippers (Murray Charters, mcharters@novus-tele.net, 2003-03-17)
• used vintage parts (Dan W, Danotis@aol.com, 2003-03-14)
• Swift 5000 custom software (Jerome Ferro, jferro@erols.com, 2003-03-13)
• Express Lifts ETQ system (steven Fairclough, wjwtwsmv@tiscali.co.uk, 2003-02-24)
• Otis (Tom, Dad31855@aol.com, 2003-02-22)
• Field education manuals. (Dominik Prefontaine, dominik13@videotron.ca, 2003-02-22)
• Can not connect to TAC50 or get a video board to work (fred, shenk@optonline.net, 2003-02-19)
• Dover Hydraulilc valve assembly (Rob Stowe, Robs@arizonabiltmore.com, 2003-02-17)
• TAC50 connection with terminal (fs, shenk@optonline.net, 2003-02-16)
• 1st Elevator purchase (Stephan C. Stille, stillesc@yahoo.com, 2003-02-13)
• US Ascension 2000 Fault "F" (Andy Englehart, andy_worlde@yahoo.com, 2003-02-06)
• Customer service (Jonny wrench@attbi.com, wrench@inthrworks.com, 2003-02-04)
• otis software (tj, elevatetj@attbi.com, 2003-01-29)
• stand-by rate of pay (paul, escalator@earthlink.net, 2003-01-21)
• S6R Drive noisey motor (Sheldon Anderson, shel@sterlingelevator.com, 2003-01-09)
• Fastest Elevator - Postponed (Don Vollrath, dvollrath@magnetek.com, 2003-01-09)
• OTIS MRVF (RON NASH, RNASH@SWBELL.NET, 2003-01-02)
• Space above cab (Thomas Hekkers, ohekk@wi.rr.com, 2003-01-02)
• Westinghouse solid state motor drive (TTL) problem (Mike DiNocenza, signor95@aol.com, 2002-12-27)
• Otis Model 21NIBLS (Pat Morse, drusser@aol.com, 2002-12-18)
• Need help with fictional design & building of 5,280 ft. high rise (Mathew H.E. Bailey, bhm0875@exp.net, 2002-12-16)
• Response from Virginia Controls (Darrell Uhearn, Darrell@themediaco.com, 2002-12-05)
• Otis buys KONE ? (Woodman, woodmann1@cox.net, 2002-12-03)
• MCE Problem with Quad Pulser (WL, safetyedge@aol.com, 2002-11-30)
• Extremely problematic elevator continues to quit working (Darrell Uhearn, Darrell@themediaco.com, 2002-11-25)
• I need an elevator (Wendell G Johnson, wendellg@rushmore.com, 2002-11-16)
• Does anyone have any vertitron manuals or prints? (joe kline, klinejoe@hotmail.com, 2002-11-16)
• Basone Elevator Co. (Cely See, ctd.group@msa.hinet.net, 2002-11-13)
• Miprom 21 DC digital drive (norm, Nswanson@generalelevator.com, 2002-11-13)
• holeless hydraulic vs. cylinder (William Ware, bware@msconst.com, 2002-11-12)
• MCE VVMC 1000 - Quad Pulser Relation Errors (WL, safetyedge@aol.com, 2002-11-11)
• Armor prodcuts (vonKarajan63@aol.com, 2002-11-11)
• TMP9129NL (robbie stewart, robbie2100@hotmail.com, 2002-11-07)
• A new tools for solving rail alignment installation problem (Mr Eric LI, lat-laser@hongkong.com, 2002-11-04)
• door close buttons (monika lenkmann, monikalenkmann@london.com, 2002-11-01)
• salem elevator prints (lee woodby, armetia@chartertn.net, 2002-10-30)
• Divelbiss elevator controller (Jon, jkh824@aol.com, 2002-10-23)
• VVVF Baldor Drive ID15H220E ( HW Desaturation Fault ) (Florentino De Pasquale, fdpelectronica@cantv.net, 2002-10-15)
• employment oportunity (mike robinson, mrobinson@lerchbates.com, 2002-10-15)
• WESTINGHOUSE ERL (RICHARD, elevator_bbr@hotmail.com, 2002-10-07)
• Meeting of Interest and Importance (John Brannon, akaelevman@aol.com, 2002-09-30)
• Compensation rope calculation up to 3.5m/s (Frankie, frankie_schmid@bluewin.ch, 2002-09-29)
• mitsubishi manual (John LeComte, jlecomte@galaxiesign.bc.ca, 2002-09-24)
• Elevator Speed (Pat Cannamela, pcannamela@mecs.moric.org, 2002-09-23)
• elevator (Natacha Ramdass, kenash10@yahoo.com, 2002-09-22)
• Need manual dumb waiter info (B. K. Blesh, BKBinITO@aol.com, 2002-09-15)
• 2-way elevator traffic (Raphael D'Souza, raphael@vic.meinhardt.com, 2002-09-14)
• MIcotrol Microvert 340 VVVF drive (Lee Cooper, ljcooper@btinternet.com, 2002-09-09)
• Elevator Mechanic's License Fee (Don Davenport, dldaven@gtcinternet.com, 2002-09-05)
• SHAFTED (Steve Norris, spinasf1@hotmail.com, 2002-09-03)
• Ascension 2000 (Bob, RMarsh2@email.usps.gov, 2002-09-03)
• 100 for 40 (Robert L. Krieger Jr, Robert.Krieger@verizon.net, 2002-08-27)
• vvvf drives (mark lennon, dudnstud@iprimus.com.au, 2002-08-17)
• roped hydraulic and dumbwaiter (shikin, nura_shikin8166@hotmail.com, 2002-08-14)
• smooth riding for elevators (mandar apte, mvapte@rediffmail.com, 2002-08-04)
• Westinghouse DMR (T R, Dad31855@aol.com, 2002-08-02)
• Help with Hitachi Elevator! (Mario Cao, yoshi_g@lycos.com, 2002-07-25)
• single speed elevators (rushad divecha, rdivecha@eroselevators.com, 2002-07-23)
• Wigger's controller prints (James M. (Jim) Imgarten, jim@generalelevatorkc.com, 2002-07-22)
• Reliable elevator roller guide (Roger Harding, rj77js@aol.com, 2002-07-15)
• escalator chugging - speed changes (harold saalfeld, haroldsaalfeld@hotmail.com, 2002-07-14)
• Northern PPU control "CPU 1600 board" (Rob Wagner, rwagner@can.fujitec .com, 2002-07-11)
• Inspections- pre 1971 elevators (Kate Balanda, kbalanda@housingcenter.com, 2002-07-10)
• Inspections- pre 1971 elevators (Kate Balanda, kbalanda@housingcenter.com, 2002-07-10)
• Pre-1971 hydraulic elevator (Kate Balanda, kbalanda@housingcenter.com, 2002-07-09)
• Southeast Elevator Controllers / Randy Kline (Francis (Gene) Wallace, franciswallace@comcast.net, 2002-07-08)
• Qei Questions (John Devoti, John@Arrowelevator.com, 2002-07-08)
• Elevator shuts down completely after holding door open (Darrell, darrell@the*mediaco.com, 2002-07-04)
• Algorithm:Control System for Elevators (Lily, lokleelee@npc.org.my, 2002-07-02)
• Westinghouse Elevator Company (M.B.O., moglesby@nc.rr.com, 2002-07-01)
• procom scripting (bart, bdesai@xo.com, 2002-07-01)
• Dover T4, anyone make a PC tool (dellcl@msn.com, 2002-06-30)
• Elevator piston test pressure (Mike Johnson, design@cummings.com, 2002-06-20)
• OTIS 301 PRINTED CIRCUIT BOARDS (Mal Smith, malcolm_smith@au.schindler.com, 2002-06-20)
• Otis Gamma 160 controller (mark tobin, mark@tudeley.freeserve.co.uk, 2002-06-19)
• Dumbwaiter Car Enclosures (Dina, dina_deluca@hotmail.com, 2002-06-18)
• OTIS 411 S.P.P.T. (Ray Pierce, ou81299@aol.com, 2002-06-13)
• LEAKING OTIS CYLINDER... Repair or replace? (Bill Johnson, bill@cummings.com, 2002-06-10)
• Otis elevator hydraulic piston failures (bill johnson, design@cummings.com, 2002-06-07)
• us ssd1 can not smooth deceleration (rich lafayette, richhuhuhu@adelphia.net, 2002-06-02)
• I want to the email adress of autur S.A. and the web site in spain (eletroway elevator company Nigeria Ld, eletrowayelevator@yahoo.com, 2002-05-28)
• elevator weight (Laurel Lindamood, llindamood@hotmail.com, 2002-05-24)
• Otis 211 DZ fault, magnet problem (rob wood, 4woods@cox.net, 2002-05-21)
• otis elevonic bounces in high speed encoder amplifier brd and both power amps ok what do you think (rich lafayette, richhuhuhu@adelphia.net, 2002-05-20)
• Hydrolic Pump motor didn't shut off (Don Warren, TINMAN@WARRENHEATING.COM, 2002-05-20)
• schematics (steve simpronio, ssimpro@earthlink.net, 2002-05-19)
• shephard residential (steve simpronio, ssimpro@earthlink.net, 2002-05-16)
• Need Otis print-10NIBL (Jim-IUEC, j.owens4@comcast.net, 2002-05-15)
• Help for PLC Logic (Hamid Mehmood, mehmoodhamid@yahoo.com, 2002-05-13)
• Low Cost Emergency Power to rescue passagers from elvetaots (Ray Conway, boguesys@aol.com, 2002-05-12)
• Otis EMS on a 401 job. (Kevin Hunts, kevhunts@hotmail.com, 2002-05-10)
• weeco #8? (michelle borcher, michelle@alliedwashoe.com, 2002-05-03)
• looking for work in raliegh-duram NC (Glenn D, BONER3988@aol.com, 2002-04-22)
• MCE/SWEO Drive Problem (Don Davernport, dldaven@gtcinternet.com, 2002-04-21)
• working in england (shane, engno9@hotmail.com, 2002-04-17)
• Car/Hall button which is weather proof/watertight (Kim Pedersen, pedersenmills@xtra.co.nz, 2002-04-17)
• damaging an elevator (Eric Hefley, emhefley@hotmail.com, 2002-04-12)
• miprom 21 (keith, keift123@insightbb.com, 2002-04-09)
• Acceleration (harsh shah, harshshah@hotmail.com, 2002-04-04)
• Elevator hoist drains (Kenny Gates, kennygates@hotmail.com, 2002-04-03)
• Otis 506SL (Paul S., escalator @ earthlink.net, 2002-03-22)
• Pacawaiter Info (D. Kronenbitter, Megadonn@ aol.com, 2002-03-22)
• Wiring Diagram (Kenny Nix, Kennny@aol.com, 2002-03-22)
• Proprietary equipment only gets bought by suckers! Anyone that knows what the companies are pulling never would buy it. (Joe Kline, whobwho@yahoo.com, 2002-03-18)
• How do you set up an Dover P.I. Brd 178ad1 (george culolias, servicetechs@yahoo.com, 2002-03-18)
• American Elevator of Louisville, Kentucky (Cheryl Miles, im10962@hotmail.com, 2002-03-18)
• Freight Elevator Upgrade - Otis F Operator (Kim P, pedersenmills@xtra.co.nz, 2002-03-18)
• dover dmc hoistway pulse count (Paul Stanich, escalator@earthlink.net, 2002-03-17)
• Home elevator need in Ohio (William Graff, graffscottydoc@aol.com, 2002-03-16)
• Otis E401, EML8/9 (Keith Witherspoon, snowpea493@hotmail.com, 2002-03-15)
• Otis E401 Diagnostics (Keith Witherspoon, snowpea493@hotmail.com, 2002-03-15)
• t-3 group (cliff smith, cliff77@att.net, 2002-03-15)
• IUEC CONTRACT TALKS (TODDY, a_whiteheart@msn.com, 2002-03-13)
• Leroy Somer Generator (Glenn D, BONER3988@aol.com, 2002-03-12)
• Thyssen TAC 50 (D. Kronenbitter, Megadonn@aol.com, 2002-03-06)
• otis (john cooper, cooper@aol.com, 2002-03-06)
• abell elev (keith, keift123@insight.com, 2002-03-04)
• Elevator Control Software (Maurice McIver, Elevator@Integrateddatabases.com, 2002-03-04)
• Home elevator (mugzy@adelphia.net, 2002-03-04)
• residential hydraulic lift (Aaron Holden, danaca4us@aol.com, 2002-03-03)
• Gamma 160 (Bill Jackson, TheLiftMan@msn.com, 2002-02-28)
• truth or rumour (phil, phil@homail.com, 2002-02-13)
• Does anyone know where to get a sheppards elevator coil? (george culolias, servicetechs@yahoo.com, 2002-02-08)
• Insallation (Brian Jean-Baptiste, brian@wow.net, 2002-02-02)
• Escalator Hand Hails (Carl Maysack, kc1185@msn.com, 2002-01-31)
• is there a shortage of lift/elevator engineers (harry bhua, hiteshbhua@yahoo.co.uk, 2002-01-25)
• Linear Door Motors (Jim Stewart, James.Stewart@gsa.gov, 2002-01-25)
• Ascension 2000 control problems (Sig Jokiel, sig@chemtrack.net, 2002-01-24)
• About present market of Hydraulic Elevator (Yingxiuhua, yingxiuhua@yahoo.com.cn, 2002-01-19)
• Necesito repuestos y servicio para ascensores BAUER (Manuel Gragirena, manuelgragirena@cantv.net, 2002-01-19)
• Otis VIP260 82GA generators (Justin Ward, Transitive@planetaccess.com, 2002-01-17)
• Thank you (world's tallest elevator) (Eva Jensen, evajensen25@hotmail.com, 2002-01-15)
• DOVER DMC (The SERVICE MAN, help@valleyelevator.com, 2002-01-13)
• The World's Tallest Elevator (Eva Jensen, evajensen25@hotmail.com, 2002-01-11)
• The World's Tallest Elevator (Eva Jensen, evajensen25@hotmail.com, 2002-01-11)
• HELP!! I need OTIS 82 M-G compounding schematic -- taps, etc. (Colby Painter, paint008@mc.duke.edu, 2002-01-11)
• where in the uniform building code does it specify the number of elevators required for a building (peter birkholz, peter.b@tomeliotfisch.com, 2002-01-10)
• Not a plunge! (anonymous,please, homeplace1@netzero.net, 2002-01-10)
• Brake calculation (Rahul Singh, rsingh@bhratbijlee.com, 2002-01-08)
• Otis GAMMA (Leo Brady, leanneb@ite.net, 2002-01-08)
• us 1230 (richard, elevator_bbr@hotmail.com, 2002-01-05)
• Ward Leonard Machines Vs. VVVF (Gearless) (Armando José Gallo Guillén, agallo@pcm.com.ve, 2002-01-03)
• EN 81-8 (David Touito, david.touito@isralift.co.il, 2002-01-02)
• looking for analog meter (Glenn Davis, BONER3988@aol.com, 2001-12-29)
• Dover schematic (Glenn Musto, gm@cybermaster.com, 2001-12-21)
• need electrical diagram for Reliance Elevator (Peter Seremetis, dagrk67@hotmail.com, 2001-12-19)
• FINDING JOBS (ANIL NAIR, anilnair@anilnair@batelco.com.bh, 2001-12-02)
• Sabiem (Paula Bencomo, ascensores@hotmail.com, 2001-11-25)
• Otis dianostic tool/software (Kim, pedersenmills@xtra.co.nz, 2001-11-21)
• Otis VIP 260 slowdown (Justin Ward, Transistive@planetaccess.com, 2001-11-21)
• wiring diagrams for kimble elevator circ 1927 5 stop (sheldon goldwine, sheldongw@earthlink.net, 2001-11-20)
• Elevator codes and regulations (Alen Vuksic, alen.vuksic@st.tel.hr, 2001-11-12)
• otis screw type operator (j gasp, tri88@hotmail.com, 2001-11-10)
• procom plus (joe hack, slappy545@yahoo.com, 2001-11-05)
• Turnbull Microtron 1962 vintage (Woodstock, elevator@technologist.com, 2001-11-05)
• Acsension 2000 Voltage Problem (brian elliott, brianelliottdelta@hotmail.com, 2001-11-04)
• elevators in the former GDR (Kristian Salka, silverdot@t-online.de, 2001-11-04)
• t-4 software problem (cliff smith, cliff77@att.net, 2001-10-28)
• Do you need to weld a 2 piece cylinder? (jeff holmes, whobwho@yahoo.com, 2001-10-25)
• Mod Master (Leonardo Hernandez, saaher@vtr.net, 2001-10-17)
• Single speed AC Brake (Steve, Manupdown@aol.com, 2001-10-13)
• WTC Elevator Emergency Brake Question (Sara P Subtil, s.p.s@angelfire.com, 2001-10-11)
• Otis Motors (Donald J. Pfuntner, dgelev3@frontiernet.net, 2001-10-03)
• Gray code to decimal converter. (Justin Ward, Transistive@planetaccess.com, 2001-09-27)
• Otis 211 won't reset with an esb1 (george, servicetechs@yahoo.com, 2001-09-24)
• elevator installation problems (construction) (kenny mcginty, lesken@kmcginty.fsnet.co.uk, 2001-09-23)
• WTC Maintenance (Charlie Mankin Local 37 Columbus, KS8L@ee.net, 2001-09-18)
• World Trade Center (Man, parabooteux@hotmail.com, 2001-09-18)
• World Trade Center (Charlie Mankin Local # 37 Columbus, Ohio, KS8L@ee.net, 2001-09-12)
• Meggers (Macky, Macky@sciti.com, 2001-09-11)
• Kone TMS900 Circuit Board Repair (David Gardner, servsale@nzes.co.nz, 2001-09-04)
• "45" motion fault (bruno, bustrk66@aol.com, 2001-08-29)
• Thysson Asscension 2000 Refresh (Macky, Macky@sciti.com, 2001-08-12)
• starting jerk (Rushad Divecha, rdivecha@hotmail.com, 2001-08-12)
• Maxton UC1A slow manual lowering (terry.dyke@otis.com, 2001-08-10)
• Mitsubishi Freqrol Z200 (Michael Piersa, irnard@yahoo.com, 2001-08-08)
• where can you get parts catalouges (hitesh bhua, hiteshbhua@yahoo.co.uk, 2001-08-08)
• OTIS GEM 311 (KEITH T, KEIFT123@HOME.COM, 2001-08-02)
• maxton valve on otis 211, leveling problems, stlu fault (rob wood, woodmann@qwest.net, 2001-08-01)
• Thames Valley Controls (Juan Carlos, j_carlos@sinectis.com.ar, 2001-07-31)
• Otis VIP260 (Justin Ward, Transitive@planetaccess.com, 2001-07-31)
• EN81 (ali dilmaghani, dilmaghani@teta.net, 2001-07-26)
• Sheppard Homelift (Richard Harrison, rharrisonbaed@msn.com, 2001-07-18)
• Professional required to set up new company (Rushad Divecha, rdivecha_eros@hotmail.com, 2001-07-13)
• Need help with two problems (Dave Carstensen, Camper684@cs.com, 2001-07-13)
• Elevator Modernization Project (Mohan Sabapathy, msabapathy@doshiassociates.com, 2001-07-11)
• Liability insurance costs in California (george, servicetechs@yahoo.com, 2001-07-08)
• Problem with security (phil, Phil@hotmail.com, 2001-06-20)
• Where can I find a used elevator for sale for use in the Philipines? (Ron Keehn, crumple@hotmail.com, 2001-06-03)
• problems (rmg, the4gals@home.com, 2001-06-01)
• Door Restrictor (Will Pickering, willp@hash.com, 2001-05-08)
• Test for leaking cylinders (Jim Boxmeyer, jim.boxmeyer@elevatorpro.com, 2001-05-02)
• We are exploring the possibility of using Plolymeric material for shaeve application other than drive sheave (Manoj Chaudhari, chaudhari_mac@hotmail.com, 2001-05-02)
• 68000 assembly code for elevator (Nader Rashad, nader_rashad@yahoo.com, 2001-04-29)
• Otis VIP 260 door problem (Justin Ward, Transistive@planetacces.com, 2001-04-18)
• service manuals (marty gentner, gentnerfab@istmacon.net, 2001-04-05)
• APTA (Andrew, amcgregor@rooneyirving.ca, 2001-04-04)
• Elevator Question (An Shih, anan4311@aol.com, 2001-03-27)
• algi and beringer valve blocks (harry, hiteshbhua@yahoo.co.uk, 2001-03-20)
• Montgomery 6010 (Bob Hodgkins, jatimes3@aol.com, 2001-03-17)
• electric (carlos, cmario63@yahoo.com, 2001-03-15)
• Kinds Elteknik (Larry, realnice59@hotmail.com, 2001-03-15)
• louis hallis (charles, Trollboys@aol.com, 2001-03-13)
• Swift 5000 Drive Faults (Kevhunts@hotmail.com, 2001-03-09)
• Otis SOB "Dial" (Maura Cady, emelkd@mediaone.net, 2001-03-09)
• Quattronic levelling problem (Warren McKenzie, wmck45@one.net.au, 2001-03-08)
• Schematics - KEICKHEFER freight elevator (Jeff Kobinsky, kobinsky@pesi.com, 2001-03-08)
• KIECKHEFER - Hydraulic freight - need schematics (Jeff J Kobinsky, kobinsky@pesi.com, 2001-03-07)
• Freight Elevator Challenge (Anthony, marcuslaw@hotmail.com, 2001-03-06)
• Dover DMC1/M Keeps popping overload ? (Kenneth R Clarke, clarkejk@hotmail.com, 2001-02-27)
• Kaneko Elevator Machines (Joe Stabler, jlstabl@attglobal.net, 2001-02-19)
• OTIS SELECTOR:pawl magnet not dropping in down direction (michael hills, kpwithhp99@aol.com, 2001-02-18)
• Dover PDQ VV (Terry Dyke, t.dyke@thezone.net, 2001-02-09)
• Traffic simulation (I Arnon, iris@rooneyirving.ca, 2001-02-05)
• Dyna-Glide II (Joe Stabler, jlstabl@attglobal.net, 2001-02-02)
• Esco PLC's (kevin cain, kevdcain@prodigy.net, 2001-02-01)
• Moseley Parts (Bryan Lee Davis, bryan.l.davis@paccar.com, 2001-01-19)
• otis plunge puzzle (c.sanderson, cerisand@inetex.com, 2001-01-19)
• OTIS PLUNGE PUZZLE (C. SANDERSON, CERISAND@INETEX.COM, 2001-01-18)
• Otis VIP260.again......door time problems.... (Justin Ward, Transistive@planetaccess.com, 2001-01-16)
• Otis Relays (Justin Ward, Transistive@planetaccess.com, 2001-01-12)
• Working Overseas (paul prefontaine, paulpre@home.com, 2001-01-10)
• Otis VIP260 (Justin Ward, Transistive@planetaccess.com, 2001-01-10)
• Airports (Andrew, amcgregor@rooneyirving.ca, 2001-01-03)
• Kito/Beebe Roustabout Lever Hoist Failure (Kim Graham, kgraham@campchurch.com, 2001-01-03)
• mechanical travel restrictor (harsh shah, harshshah@hotmail.com, 2001-01-01)
• Amtech Hydro getting out of step every other week? (george, georgeculolias@hotmail.com, 2000-12-23)
• Code book (Leslie Grey, Jr., Jamune2000@aol.com, 2000-12-18)
• montgomery escalator (keith, keift123@home.com, 2000-12-18)
• 6850 Otis selector (Robert Barger, sbarger@uark.edu, 2000-12-16)
• Bypass swithes (Don Pfuntner, brandon1@frontiernet.net, 2000-12-15)
• OTIS #2 MACHINE (ROBERT WAGNER, rwagner@internet.look.ca, 2000-12-07)
• Can anyone help? Kito/Beebe Roustabout Lever Hoist, Model LH 600? (Kim Graham, kgraham@campchurch.com, 2000-12-04)
• Question.... (Alephtina Mikhalkov, alephtina@hotmail.com, 2000-11-29)
• drug testing (lol, beck7169@hotmail.com, 2000-11-27)
• Plunging lift research- full credit given upon publication (Maureen O'Grady, probeworldwide@hotmail.com, 2000-11-27)
• Compensating cables (Paul Jung, pauljung@popusers.com, 2000-11-26)
• Ward Leonard (Justin Ward, transition_au@planetaccess.com, 2000-11-24)
• rope slip (Justin Ward, transistive@planetaccess.com, 2000-11-24)
• Small Elevator (Edward Lauria, EdLauria@aol.com, 2000-11-14)
• otis 211 (keith, keift123@home.com, 2000-11-13)
• Battlebots made from elevator parts&components (MATHEW H.E. BAILEY, mheb@zdnetonebox.com, 2000-11-09)
• DC 12 pulse drives (Justin Ward, jw@hotmail.com, 2000-11-09)
• DMC Communication Problem (Dan Redmond, dredmond@mowreyelevator.com, 2000-11-03)
• Hydraoulic elevator problem (Steve Guy, glm15@dial.pipex.com, 2000-10-26)
• Turnbull Controller (Don Pfuntner, brandon1@frontiernet.net, 2000-10-19)
• Lift fare 2000_Milan (Angus Varcoe, Varcorp@mweb.co.za, 2000-10-14)
• otis 211 fault (rob wood, woodmann@uswest.net, 2000-10-12)
• Online Elevator Museum (Brian K. Golden, brian@elevator-world.com, 2000-10-06)
• Duplex Logic (harsh shah, harshshah@hotmail.com, 2000-09-23)
• reactions (Ted McG, amcgregor@rooneyirving.ca, 2000-09-21)
• Anti-Creep Leveling (harsh shah, harshshah@hotmail.com, 2000-09-03)
• Elevator rescue (Shane George, rescue4@flash.net, 2000-08-15)
• World Trade Center malfunction. (Fred Loesch, fwldjl@rcn.com, 2000-08-13)
• Dover Tlll w/ DC-300E SCR Drive- Moter Field Control Prob. (Bob Bull, Liftman2@netscape.net, 2000-08-11)
• Maida Technologies (Don Pfuntner, brandon1@frontiernet.net, 2000-08-11)
• Burdett-Roudtree Dumbwaiter (Fred Baltes, Elman101@aol.com, 2000-08-02)
• Sheppard 2 speed ac elevator tripping overload (joe kline, servicetechs@yahoo.com, 2000-07-24)
• emergencies at elevators (hamodi, montela@bigfoot.com, 2000-07-19)
• Different Between Geared AC VV High Mass & Low Mass (Rudy Setiawan, rudy@peter.petra.ac.id, 2000-07-18)
• Elevator Engineer - looking to move to the States (Mike Purdy, mikepurdy@eircom.net, 2000-07-16)
• Haughton Type B2 Vernier (Ron Thomas, rthomas3@neo.rr.com, 2000-07-14)
• thanks for response (dave, dac@oz.net, 2000-07-03)
• Manuels for magnetech and is the Freedom tool any good? (laurie, lauriekinnings@hotmail.com, 2000-06-30)
• Telescoping jack hydro (Steve, steve.thomas@murraystate.edu, 2000-06-28)
• vegatable oil in hydro (dave, dac@oz.net, 2000-06-24)
• Interpretation of 1996 BOCA rule 3004.3.1 (Kevin Doherty, kevindoherty@sprynet.com, 2000-06-18)
• Otis Interlock circa 1919 (Vernon P. Keller, vpkeller@earthlink.net, 2000-06-02)
• My Job - Fun! (Matt Schafer, matts@wavetech.net, 2000-05-25)
• Warning Omron Relays (Bob, rsess73194@aol.com, 2000-05-25)
• Dover "squirrel on limb" (MATHEW H.E.BAILEY, mheb@zdnetonebox.com, 2000-05-24)
• Weeco door operator (Joe M..., bachaglupy@aol.com, 2000-05-17)
• Miprom 21 blows Amptraps (dave, dac@oz.net, 2000-05-16)
• Other good elevator cites or forums??? (Joe M..., Bachaglupy@aol.com, 2000-05-13)
• MCE Hydro (Grey Ghost, Tret@yahoo.com, 2000-05-13)
• PVC casing (Donald Pfuntner, brandon1@frontiernet.net, 2000-05-09)
• PVC casing (Donald Pfuntner, brandon1@frontiernet.net, 2000-05-08)
• Door Open Time (Shaun Ewing, shaunewing@telstra.com, 2000-05-06)
• hydraulic jacks (harsh shah, harshshah@hotmail.com, 2000-05-03)
• Bifurcated Relays - Benefits for microprocessors (Robert Sessanna, cyberdynrelay@hotmail.com, 2000-05-02)
• Looking for manuals on Otis 211,311,411 (Eric A, Aappanajr@aol.com, 2000-04-30)
• correlation between load weight and energy (Rudy Setiawan, rudy@peter.petra.ac.id, 2000-04-27)
• Why drains are in elevator pits? (Bill Cowdell, wcowdell@uci.edu, 2000-04-21)
• Looking for prints for a Srurm elevator (Pat, patp@localaccess.com, 2000-04-20)
• Squeaky Dover door rollers (Larry LaMar, LWLaMar52@AOL.COM, 2000-04-19)
• Rope Marriage (Steve G, Manupdown@aol.com, 2000-04-17)
• otis 211 (bob, elevator@elevator.com, 2000-04-14)
• Talks, speeches, homilies, concordances (Ed Lauzon Sr., grader@accglobal.net, 2000-04-06)
• VVVF Drive for Elevators (harsh shah, harshshah@hotmail.com, 2000-03-31)
• New Relay Line For Elevators (Robby Sess, rsess73194@aol.com, 2000-03-29)
• kone geared mach (john rush, jrush10509@aol.com, 2000-03-28)
• Compensating ropes (richie, ricrf@peoplepc.com, 2000-03-27)
• Blance load test (richard fraser, ricrf@peoplepc.com, 2000-03-26)
• new gears-no backlash (Chuck, cptcobrajt@aol.com, 2000-03-23)
• Elevator problems (Stan, mestan@bachamp.com, 2000-03-22)
• Need Info about "Bumb-Waiters"... (Bill Garcia, s2g3fl@gateway.net, 2000-03-17)
• Elevator (Art, ???????@???????.com, 2000-03-13)
• info on elevators (thomas andrew muha, amuha@hotmail.com, 2000-03-13)
• thames valley lift controls (Amarnauth Appana JR, aappanajr@aol.com, 2000-03-12)
• elevator attendant's, what is there official name? (CJK, swcowboy@hotmail.com, 2000-03-11)
• Catalogs? (Todd Fitts, tfitt001@odu.edu, 2000-03-09)
• specifications of otis gearless machines in new york woolworth building (MATHEW H.E. BAILEY, mheb@zdnetonebox.com, 2000-03-08)
• Looking for prints (Tom, RRus153923@aol.com, 2000-03-05)
• Independant Service (Shaun Ewing, shaunewing@telstra.com, 2000-03-04)
• Definitions (Harold R. Brink, PE, hbrink@earthlink.net, 2000-03-01)
• NATIVE AMERICAN ELEVATOR TECHNICIANS (Mathew H.E. Bailey, mheb@zdnetonebox.com, 2000-02-26)
• A17.1 Rule 210.10 (1996) (Sherlock Holmes, Sherlock2u@yahoo.com, 2000-02-25)
• Emergency Power and re-occuring blown generators (Jack Mueller, muellerjack@hotmail.com, 2000-02-23)
• QUESTION about articles on Elevators (BB, bradenblack@wwdb.org, 2000-02-23)
• swift 5000 (john rush, jrush10509@aol.com, 2000-02-22)
• Future of big Companies? (Larry Horton, llhorton@pacifier.com, 2000-02-21)
• Old Armor problem. (Fred Loesch, fwldjl@rcn.com, 2000-02-21)
• Rule 101.1 Enclosure of Machine Rooms (building inspector, fulchcw@ci.danville.va.us, 2000-02-16)
• Emergency Power (Harsh Shah, harshshah@hotmail.com, 2000-02-12)
• Elevator experts will [hopefully] find these questions simple... (Briana White, collectivewisdom@yahoo.com, 2000-02-11)
• Research on elevator technologies (Mark Hughes, Mark_A_Hughes@talk21.com, 2000-02-05)
• Fastest Elevators (Shaun Ewing, shaunewing@telstra.com, 2000-01-28)
• Door jam (Shaun Ewing, shaunewing@telstra.com, 2000-01-28)
• Most Romantic Elevators (DeWayne Knight, d_e_knight@iquest.net, 2000-01-28)
• Empire State Building Fall? (Fred Loesch, fwldjl@rcn.com, 2000-01-27)
• Getting stuck in an elevator (Nalini Kuruppu, nalini@jps.net, 2000-01-27)
• Gear types in Traction elevators (harsh shah, harshshah@hotmail.com, 2000-01-24)
• World's Most Haunted Elevators (Dewayne Knight, d_e_knight@iquest.net, 2000-01-24)
• ARE CAR DOORS/ GATES USED ON ALL U.S. ELEVATORS (goti, goti123@yahoo.com, 2000-01-21)
• Security cameras in elevators (Brian Smith, bsmith@ppk.com.au, 2000-01-11)
• Alternative to traction & hydraulic elevators.. (harsh shah, harshshah@hotmail.com, 2000-01-01)
• problem otis vf2000 series (Mr. Rolando Garcia, richville@access.net.ph, 1999-12-21)
• Elevator with two drive puleys at the top of shaft (A Fayol, afayol@unimedia.fr, 1999-11-29)
• casing leak in a hydro. elev (MANNY BAHNA, MSBAHNAMD@AOL.com, 1999-11-17)
• Technical information (JOHN FELLIN, BITSANDBITES@WEBTV.NET, 1999-11-08)
• Elevator Locks (Darin Rothers, darin.rothers@archon.net, 1999-11-01)
• Bought buisness and need parts info for hydros (Pat Payne, patp@localaccess.com, 1999-10-26)
• Door Restraints (Allan Galbraith, agalbraith@worldnet.att.net, 1999-10-23)
• westinghouse monkey on a stick. (rbleaujr@aol.com, 1999-10-16)
• Otis ADA upgrade (Roger Shumate, RCShumate@cs.com, 1999-10-14)
• rusty piston (Jimmy Jaramillo, www.swifkik@aol.com, 1999-10-09)
• Hydro noise (Steve, manupdown@aol.com, 1999-10-09)
• safety - peelle doors (ted o, arnon.mcgregor@cyberus.ca, 1999-09-02)
• Need wiring diagram of a relay logic self sealing circuit (Richie Fern, rfern@ebi.com, 1999-08-23)
• Navy elevator (Ian, Vatorshop@aol.com, 1999-08-20)
• Inspections (Karen, purp@GlobalEyes.net, 1999-08-20)
• Thyssen/Dover/Montgomery? (Byron, peawee@hel.net, 1999-08-17)
• Moment of Inertia of Elevator System (Harsh, harshshah@hotmail.com, 1999-08-11)
• Backlash (Tom Ross, RRus159823@aol.com, 1999-08-10)
• Strum info #520 (pat, patp@localaccess.com, 1999-07-29)
• is it possible... (Mara Yollick, myoll@wt.net, 1999-07-25)
• Baxco Fire Service up-grade (Tom Ross, RRus153923@aol.com, 1999-07-19)
• Where do I go from here? (TJ Molden (otis), hmolden`@ticnet.com, 1999-07-17)
• Jobs (Ian, Vatorshop@aol.com, 1999-07-14)
• Corner post elevators - any comments? (Stephanie Bassler, s-bassler@peapc.com, 1999-07-13)
• Anyone heard of an elevator manufacturer named CTC?? (goti, goti123@yahoo.com, 1999-07-11)
• Otis 401 (T.J. Molden, hmolden1@ticnet.com, 1999-07-09)
• sheppard elevator prints or information? (joe kline, lauriekinnings@hotmail.com, 1999-07-06)
• dover traflomatic T-IV (joan duke, jduke@icomnet.com, 1999-07-05)
• Minimum overhead??? Max 10' w/ 8' cab? (Chris Santoli, csantoli@devereauxarch.com, 1999-06-11)
• controller change out leads to massice elevator callbacks. (S. Swett, swettshop@worldnet.att.net, 1999-06-05)
• Any New Technology for Service (Artie Johnn, Artie_Johnn@msn.com, 1999-05-26)
• New technology for Service (Artie Johnn, Artie_Johnn@msn.com, 1999-05-26)
• New technology for Service (Artie Johnn, Artie_Johnn@msn.com, 1999-05-26)
• otis service tool (david hughes, d4vidd@yahoo.com, 1999-04-25)
• Moseley Elevator (parts?) (Angel Swarthout, Swarthout,Angel@CNF.com, 1999-04-14)
• Hydraulic elevator failure (Jerry Rexer, jjrexer@csrlink.net, 1999-04-12)
• plc controllers (john kinnings, johnkinnings@hotmail.com, 1999-04-07)
• y2k problems (David Cochran, dcochran@ci.lufkin.tx.us, 1999-03-25)
• Microscan, Date resetting (J.B. Sneider, jbsfldee@hal-pc.org, 1999-03-14)
• Otis MRV vrs MRVF (Tom Isaacs, tisaacs@writeme.com, 1999-03-14)
• I need the information about the circuit diagrams and control system source code of HITACHI elevator (Qian TL, qnog@263.net, 1999-02-28)
• length of time for elevator shut down (mort cohen, mortcohen@sprintmail.com, 1999-02-21)
• service tool for dmc (john kinnings, klinejoe@hotmail.com, 1999-02-19)
• ada buttons for a dover hydro (joe kline, klinejoe@hotmail.com, 1999-02-16)
• Weigher load (Paula Bencomo, pbencomo@panagroup.com, 1999-02-11)
• Swift Futura (Paula Bencomo, pbencomo@panagroup.com, 1999-02-09)
• Baldor Vector Drives (John Fellin, bitsandbites@webtv.net, 1999-01-30)
• CODE CERTIFICATION (RUSS LESTER, BOSSRUSS@AOL.COM, 1999-01-26)
• Mitsubishi Freqrol A200 (John Fellin, bitsandbites@webtv.net, 1999-01-18)
• dover parts (robert wagner, rwagner@sprint.ca, 1999-01-07)
• Survey of Hydraulic Elevator injuries or fatalities (John Koshak, John_Koshak@AdamsElevator.com, 1999-01-01)
• Electrical & Fire Alarm Requirements for elevators (James Wright, jameswright@home.com, 1998-12-24)
• Otis safety dogs (Marc Vendetti, mcv@prolift.com, 1998-12-22)
• prints for a newer esco hydro (joe, klinejoe@hotmail.com, 1998-12-16)
• internationals internet address (jag, jaycee8914@aol.com, 1998-12-15)
• Motor for an Otis geared Elevonic elevator(standard) (Richard Change, 30change@cua.edu, 1998-12-11)
• Otis B3 MG Armature (Michael B. McManus, mmcmanus@radiant.net, 1998-11-11)
• Interesting Problem (Glenn Schmitz, glennschmitz@hotmail.com, 1998-11-07)
• Needing Mechanics (William Blackshear Jr., red_rader@msn.com, 1998-11-04)
• New Otis Hydraulic Elevators (William Blackshear Jr., red_rader@msn.com, 1998-11-04)
• Hydro "safety" device (Andy, vertical@cyberus.ca, 1998-11-04)
• elevator b board (Andy, arnon.mcgregor@cyberus.ca, 1998-10-28)
• Westinghouse hydro (ge plc) (Don Koeppe, dkippy@radiks.net, 1998-10-23)
• effects of gravity on an elevator rider (stomach loss) (mike elliott, mdjmcd@tir.com, 1998-10-12)
• Waygood (Jarrod Emery, jede@gil.com.au, 1998-10-02)
• Motor-Generator set idea (Brian Hourigan, digi@inreach.net, 1998-09-19)
• "snake eye" screwdrivers or tips (Allan Willbanks, aswill86@bellsouth.net, 1998-09-08)
• SCR versus MG Drive (Ted Arnon, arnon.mcgregor@cyberus.ca, 1998-09-03)
• Comp Chains (Plastic and Bare Chain) (tom, Aaronrosp@yahoo.com, 1998-08-03)
• Elevator market in China (Sean Lee, seanl@pixi.com, 1998-07-27)
• preconnectorizing travelers & other wiring (AR, Aaronrosp@yahoo.com, 1998-07-07)
• Tower Of Terror (Steve, manupdown@aol.com, 1998-06-28)
• year 2000 (john rush, jrush10509@aol.com, 1998-06-21)
• Historic car switch elevators still in operation (Alex Begin, alexb@birdata.com, 1998-06-15)
• Balance Load Test Procedure (Hank Harwardt, HHarwardt@AOL.COM, 1998-06-14)
• Paid B.A Forsmall locals or leave them alone? (JAG, mrodvious@aol.com, 1998-06-12)
• Elevator Speed (Steve Thuman-Local #8, sandc@ecis.com, 1998-05-31)
• Has anyone heard of a call-tronics emergency telephone? (joe kline, klinejoe@hotmail.com, 1998-05-26)
• Open/Close timing standards (elizabeth fry, wfry68@marinemwr.or.jp, 1998-05-08)
• looking for an analysis of the elevatormarket in Belgium (Roel Peeters, te930099@ufsia.be, 1998-05-04)
• Infomation on HIGH TECH MOTION CONTROL (Ray Meadows, thegerb627@aol.com, 1998-05-02)
• Failure light on a Dover Compuatic (Joe Kline, klinejoe@hotmail.com, 1998-04-28)
• S.E. Elevator 1960 Vintage (J Shugart, slim2@gte.net, 1998-04-21)
• Diagnostic Tester for Otis Hydraulic Microprocessor (M. Scott, mscott01@apsc.com, 1998-04-02)
• Opinions of the Elevator Industry (Ken Edwards, K.A.Edwards@sussex.ac.uk, 1998-03-23)
• Elektron Electric Elevator (Elmer J. Canfield, jcanfie1@nycap.rr.com, 1998-03-09)
• Anyone ever heard of TVLC ? (<>, secret@secret.com, 1998-02-26)
• Info on Otis SOB model from 1920's (Maura Cady, cady@ameritech.net, 1998-02-22)
• Year 2000 Problem & Elevators (Bill Dale, billdale@lakesnet.net, 1998-02-18)
• DC-SCR or AC-VECTOR - Which way to go? (Len Greenberg, usaman@earthlink.net, 1998-02-18)
• Can a bronze bull gear be repaired instead of replaced? (john kinnings, Johnkinnings@aol.com, 1998-02-06)
• Diagnostic software for Dover T4 & DMC (Ray Lancon, ray.lancon@juno.com, 1998-01-29)
• Otis OMM Index (Vernon P. Keller, vpkeller@earthlink.net, 1998-01-29)
• MG-SET REPLACEMENT (MIKE SAUNDERS, MSAUNDER@GSA.GOV, 1998-01-26)
• New routes-10 units per man (Mr. Anon, nowayjose@aol.com, 1998-01-25)
• PC 104 replaces PLC (Xu Rong, rongxurwyu@ihw.com.cn, 1998-01-25)
• Time for "Maintenance" (obviously anonymous, nocando@hotmail.com, 1998-01-21)
• Swift Futura (Liar Liar Elevator Can I help You, Noofficesupport@aol.com, 1998-01-13)
• I need help with ADA codes (George Culolias, trashtec@pacbell.net, 1998-01-13)
• purchasing new static dc drive and motor (Wade Eckler, weckler@electrotek.com, 1997-12-19)
• Plastic Compensating Sheave/Pulleys (nylatron) (Aaron Rospierski, Aaron_Rospierski@siecor.com, 1997-12-17)
• OTIS 506 SLIMLINE ESC. (Jerry Stevens, GABRIEL61@aol.com, 1997-12-12)
• When to quit making repairs and modernize (Marty Waterfill, ppdmlw@langate.gsu.edu, 1997-12-12)
• Westinghouse 32 N Escalator (Randy Fort, IUEC10@aol.com, 1997-12-09)
• Top Technologies (Ken Edwards, K.A.Edwards@sussex.ac.uk, 1997-12-04)
• Elevator Passenger Wait Time (Cecilia Kelnhofer, CeciliaKF@aol.com, 1997-12-03)
• Looking for studies/surveys on people's behaviour in elevators (Kim Fehr, kfehr@interlog.com, 1997-11-30)
• Programmable Logic Controllers (PLC) (Andrew McGregor, arnon.mcgregor@cyberus.ca, 1997-11-27)
• year2000 compliant (john rush, jrush10509@aol.com, 1997-11-27)
• Pittsburg PA History (Dave Cremins, D.Cremins@worldnet.att.net, 1997-11-22)
• Masonry (Vernon P. Keller, vpkeller@earthlink.net, 1997-11-14)
• The Dept of Justice and escalator codes (John Shugren, elevator@black-hole.com, 1997-11-05)
• Route Work, Nuts and Bolts or Beans (Fred Baltes, Elman101@aol.com, 1997-10-27)
• Single member voting for officers????? (Rolland Harrison, rolland@fastlane.net, 1997-10-26)
• Federal Regulation???? (Rolland Harrison, rolland@fastlane.net, 1997-10-25)
• I need wiring diagrams for a duplex 5 stop US hydros (G Culolias)
• I Need Wiring Diagrams for Elevator Electric Elevators (G Culolias)
• Salary Survey for Elevator Co. Employees (Jim Dervcer, jimder@aol.com, 1997-10-14)
• 100 hour service route for a 40 hour week (Vernon P. Keller, vpkeller@earthlink.net, 1997-10-11)
• Use of loctite on generator bearings (Patty Erickson, internet:erickp@fm.facm.umn.edu, 1997-10-10)
• Montgomery Escalator Brakes (Vernon P. Keller, vpkeller@earthlink.net, 1997-10-08)
• Dover
• 1930 Otis prints (Andrew Brengman, abrengman@worldnet.att.net, 1997-09-28)
• Year 2000 (Randy Fortwengler, iuec10@aol.com, 1997-09-22)
• Baxco boards (Rudy Boyance, Boyancefam@earthlink.net, 1997-09-19)
• Calling all Otis mechanics for generator help (Roger Shumate Local 80 IUEC, rogershumate, 1997-09-18)
• MRVF- are they a bad design? (Jim Morrison, JIMM@highwood.mhs.compuserve.com, 1997-09-17)
• Montogomery Mega Tech (Don Koeppe local #28, dkippy@radiks.net, 1997-09-11)
• SCR Noise - (A McGregorI, arnon.mcgregor@cyberus.ca, 1997-09-07)
• Otis 32R Escalator (Don Koeppe, dkippy@radiks.net, 1997-09-07)
• Notable elevator design in public spaces (Gerry Guthrie, gguthrie@staff.uiuc.edu, 1997-09-07)
• fujitec royal superdine (john rush, jrush10509@aol.com, 1997-09-06)
• Elevator Drive noise level (N.B.Patil, nbpatil@technologist.com, 1997-09-04)
• G.E.Valutrol (Joe McLoone, JMclo30547, 1997-09-03)
• Residential lift (Nolan Scheid, nolan@clipper.net, 1997-08-30)
• Help (Eduardo E. Espinoza Goldman, espigold@chiriqui.com, 1997-08-30)
• Elevator statistics (Peter Fayette, ptf@znetwork.net, 1997-08-25)
• Turnbull elevators (Robin, pazzazz@bc.sympatico.ca, 1997-08-14)
• Turnbull elevator (Robin Boyd, pazzazz@bc.sympatico.ca, 1997-08-13)
• ANSI codes (Ronald B. Jones, rjptjones@aol.com, 1997-08-07)
• 1 inch rope (Rudy Boyance, boyancefam@earthlink.net, 1997-08-04)
• Information on an Old Elevator (L.B. Lands, historicamerican@mindspring.com, 1997-08-04)
• Maintenance Software (sanmo@infochan.com, 1997-08-04)
• 100 hour Service route for 40 hr week.
• The best way to market a new elevator company (G Culolias)
• 1930 Otis Prints (Andy Brengman, abrengman@worldnet.att.net, 1997-07-23)
• Making it Better (Anonymous)
• prints for otis (Tom Isaacs, tisaacs@writeme.com, 1997-07-21)
• List of tallest subway elevators? (Michael Schaeffer, mschaeff@mcn.org, 1997-07-18)
• Error Codes (Vernon P. Keller, vpkeller@earthlink.net, 1997-07-17)
• brushes (john hoplins, town, 1997-07-08)
• contract talks (Tom Boehle, ttboehle@wcic.org, 1997-07-06)
• Who knows aboud this type of elevator? (Peter van Nieuwland, P.M.vanNieuwland@research.kpn.com, 1997-06-25)
• Dover T3 (Charlie Mankin, cmankin@ee.net, 1997-06-24)
• elevator traffic analasys (XU Bing, bxu@sfp.zju.edu.cn, 1997-06-02)
• Help me!!! (Amanda Warmuth, warmuth@21century.com.au, 1997-06-01)
• Dental Plan I.U.E.C. (Mr Pissed Off, PISSED OFF@AOL, 1997-05-27)
• Name for fear of elevators? (Amy Garrett, zozo@sfsu.edu, 1997-05-27)
• elevator design (doug didier, didierd@erols.com, 1997-05-24)
• Tallest hydraoulic elevator you've seen (Paul Jung, Paul.A.Jung-1@umn.edu, 1997-05-23)
• I need wiring diagrams for 2 1962 armor geared machines (George Culolias, napalm10@themall.net, 1997-05-21)
• Odd behavior -- Otis 48R escalator (Rick Klingbeil, RKlingb@Pacifier.com, 1997-05-16)
• Type B Safety Stopping Distances with Full Load (Patty Erickson, internet:erickp@fm.facm.umn.edu, 1997-05-14)
• OTIS MRVF (PAT CARRAJAT, PATRICK.PARTSMAN@MCI2000.COM, 1997-05-13)
• Megatech (Stephan M grega, Manupdown@aol, 1997-05-10)
• US 1220 (Darryl Fisher, abbydo@sccoast.net, 1997-05-08)
• Safety Training (Steve Geiger, skgeiger@worldnet.att.net, 1997-05-06)
• Escalator Education Material (Michael B. McManus, Local 82, vancouver, Canada, mmcmanus@radiant.net, 1997-04-27)
• Fullers Earth (William Dennis, wdennis@world2u.com, 1997-04-21)
• Dover two speed doors (John O. Stambaugh, jos@gate.net, 1997-04-11)
• Groove measurment (Tom Grosch, groscht@therviver.com, 1997-03-30)
• Educational Resources (J. Russell Mitchell, mitchell@bluemarble.net, 1997-03-25)
• Installing firemens on westinghouse mph 1 (Dan Bruns, dbb@pioneerplanet.infi.net, 1997-02-16)
• Question on elevator safety (Zoran Kovacevic, zoran.kovacevic@guest.arnes.si, 1997-01-26)
• Dover Solid State hydro (not DMC the TTL swing out panel version) (Rolland Harrison, rockyh@phoenix.net, 1997-01-09)
• Welcome - (NEW ElevatorMax© Discussion Group Invitation - 3/19/2005) (Ray Griffin, elevatorguy@geocities.com, 1997-01-06)