holeless hydraulic vs. cylinder

greenspun.com : LUSENET : Elevator Problem Discussion : One Thread

In a new 60 bed nursing home application , 2 elevators serving 3 floors of 17,500 sf each, 13' floor to floor - is there a reason NOT to use the cheaper holeless elevator rather than a cylinder model? - Schlindler is the brand we are considering

-- William Ware (bware@msconst.com), November 12, 2002

Answers

Assuming that hydraulic elevators are suitable for the application and that the other specifications (as to size, speed, etc.) are suitable and that the holeless design does not involve telescoping sections, the answer is "NO".

-- John Brannon (akaelevman@aol.com), November 12, 2002.

Holeless hydraulic elevator

William, I agree with Mr. Brannon's comments. I would like to add that you may want to ask Schindler if their equipment is non-proprietary?

Proprietary equipment may be less money to install, but how much will it cost you when only one or maybe two companies can work on it?

Jon

-- Jon (jkh824@aol.com), November 13, 2002.


Here is some info... ---------------------------------------------------------------------- ---------- Additional Resources

Roped Hydraulic Otis' Roped Hydraulic is a cost-effective, environmentally safe above- ground solution, especially suitable for hazard-sensitive and waterfront sites, and for existing buildings.

Specifications low-rise

Drawings (Typical Layouts) Front & Rear Opening Front Opening

Designed for applications of up to 60 feet, the system eliminates drilling and its associated problems, uncertainties and costs-- substantially lowering the risk of soil and ground-water contamination.

The Roped Hydraulic is engineered for reliability and easy maintenance--components are tested for a projected life of approximately 20 years.

Need Sales Assistance? Click here for more help

---------------------------------------------------------------------- ---------- Holeless Hydraulic The Holeless Hydraulic system eliminates the need for either a well hole or buried piping. The best application for the Holeless product is most any 2-story building with less than 14' of travel from one floor to the other.

Specifications low-rise

Drawings (Typical Layouts) Front & Rear Opening Front Opening Service/Hospital - Front & Rear Service/Hospital - Front Opening

Its above-ground Holeless configuration responds effectively to the risk of soil and groundwater contamination, and greatly reduces environmental concerns. This package-type unit is most practical for those 2-story buildings where handicap access is required.

Need Sales Assistance? Click here for more help Gen2 The Elevator Re-imagined The Gen2 system combines 21st century technologies and materials to provide 21st century solutions: More usable building space. Timesaving installation. Energy efficiency. Environmental protection. Design flexibility. Enhanced safety systems.

Space Saving, Energy-Efficient, Clean The Gen2 system requires no machine room - the mechanism is at the top of the shaft. Lightweight, flexible, polyurethane steel belts permit the use of an energy-efficient machine.

Better for Architects, Builders and Owners The Gen2 system liberates architects to design buildings without the need for a machine room. Builders benefit from a rapid, controlled installation process that minimizes external trade interference. And owners enjoy an economical transportation system with more rentable space.

Clean, Efficient, Better for the Environment The Gen2 hoist stays clean as the belts and the gearless machine (which has permanently sealed bearings) require no oil. The synchronous permanent-magnet machine, with a radial air gap, is as much as 50% more efficient than a conventional geared machine.

The Gen2 systems electro-magnetic filter eliminated interference with the buildings other electrical system.

Superior Ride Comfort The Gen2 system is remarkably quiet and comfortable. The compact gearless machine,flexible belts on a small sheave and specially designed machine brake making for a quiet ride. No detail was left to chance. OTIS.COM BEST REGARDS DAN

-- Dan W (danotis@aol.com), March 12, 2003.


Moderation questions? read the FAQ