Schindler Mikonic Vgreenspun.com : LUSENET : Elevator Problem Discussion : One Thread
Need passwords for Mikonic V and locations of floor allocation tables to get new floor to work.
-- (firstname.lastname@example.org), February 02, 2005
Passwords are job specific. If you just picked up the job from Schindler you are going to have to ask them for it, or get someone smart enough to crack the system. Good luck.
-- Jim B (email@example.com), February 02, 2005.
try abcd, it works in my area
-- (firstname.lastname@example.org), February 07, 2005.
The Most Common is the most simple = micv or 1874 the earlier response as ABCD is for Miconic LX, SX & TX you can also use mode or pink.
-- Mike Vaughn (email@example.com), February 07, 2005.
With MICV you are close. Miconic V as its called has nothing to do with Miconic SX, LX, etc. MicV as we call it is a good old control system...
-- Johnny Cash (firstname.lastname@example.org), February 13, 2005.
-- someone (email@example.com), February 18, 2005.
for change the pasword you can get out the eeprom on the pak316 or pak 216 or the pec216 then the pasword is MICV
-- christophe chassevant (firstname.lastname@example.org), March 11, 2005.