SPR enginegreenspun.com : LUSENET : MV Agusta F4 : One Thread
Hello, I have a SPR. As you know, the engine is attached of origin. In the handbook, it is indicated 13600 rmp max but is it for an original engine? Or is it for an engine AFTER a modification in "FULL POWER"? I wonder this, because at 11000 rmp, it seems "blocked" Your opinions will be welcome
-- (email@example.com), February 11, 2005
Hmm.....that's funny.My evo3's redline is at about high 12k- 13k+rpm.The shift light will start blinking at about 12krpm and the engine cuts at about 13k+rpm.At the track I am able to reach 120km/h in first gear,155 in second and 203km/h in third.Why don't you check your max speed in every gear and refer it with the official MV webpage. Regards, Iskandar Z
-- Iskandar Z (firstname.lastname@example.org), February 11, 2005.
thanks Iskandar for your reply. Yes, it is a good idea. I will do it best regards
-- (email@example.com), February 11, 2005.
The dash light comes on at 12,500 and the rev limiter is set for 13,100 rpm. This is the factory setting. Max power is 12,600 with a 500 rpm over run.
-- Cali-Kane (firstname.lastname@example.org), February 11, 2005.