MV BRAKE LEVER AND MASTER CYLINDER

greenspun.com : LUSENET : MV Agusta F4 : One Thread

Does any one by any chance have a brake lever and master cylinder for an f4 or similar. I was bidding for a pair of clutch and brake and only won the clutch .. Dohh!!

money is waiting if anyone can help!

Cheers

Adam

-- Adam Park (Adampark@aparkelectrical.com), February 15, 2004

Answers

Adam,

the best bet is to get them new if you need the whole thing, though they are about 200 ish. If just the actual levers, there is a guy in canada making CNC'd replacement copies, at www.canadian- production.ca. Its about $125 a pair.

If you do need the whole set, a lot of people change the standard parts for Brembo radial pull units, not much more expense, but they give better feel, and a bit more bite.

These are the brembo part numbers you'd need:

10.4760.70 brake cyl 199.99 10.4446.30 brake reservoir 6.20 BL992-31SP banjo bolt with brake light switch for single line from cylinder 18.60 (this is a goodridge part, the brembo one is pants though if you want to run two lines from the m/c its a different part) These prices were from www.ecparts.co.uk.

Phil.

-- Phil (p.wood@tesco.net), February 15, 2004.


Moderation questions? read the FAQ