LED lighting

greenspun.com : LUSENET : Junkyard Wars : One Thread

I want to put a cheap, clean, LED, lighting system on my mini bike probly using a 6 volt battery, would this work and how many LED's could I put on a 6 volt battery? could i do it with out needing any kind of a curcuit board?

-- Dash (dashvortex@yahoo.com), December 15, 2003


OK heres how i know how to do it. You will need a head light which you can get here http://fullblownminis.com/html/hcc_choppers.html also you will need a battery which you can also get on that site. Then you will need a switch. A rocker switch is prob. the best. I dont know if you've done this before but youhave to put it al togather. I dont know if know how to weld but you want to put the battery on some how then assemble the light and put it on the frame. then you wan to buy like a plastic caseing for wires so they dont get damaged. then put the rest togather. I hope you can do the rest good luck

-- FV Choppers (Bigshot0617@aol.com), February 01, 2004.

Moderation questions? read the FAQ