Here is a good site for building your own splitter.

Splitter

-- Little Bit Farm (littlebit@brightok.net), October 19, 2003

Answers

Stan, Unfortunately I am stupid when it comes to the technical stuff. Could you explain what a capture link is? Also the only reason I am using the link is so people can point and click. Thanks.

Little Bit Farm

-- Little Bit Farm (littlebit@brightok.net), October 20, 2003.

LBF! Good article for the person who wants to build a splitter. Old Jeep built one a couple years ago. He's still tinkerin with it and addin things he wants. He just completed the hydrolic lift which lifts the big chunks up to the splittin table. An old 7' piece of railroad rail [from the days of the steam engines] was used for the I beam. It may bend under tremendous pressure but will come back as soon as the pressure is released. The reason for the old steamer rail is because of the wider "foot" of those old dudes. It's turned upside down anyhow so it makes a bigger "table" for the log to lay on while the ram splits it.

I'll be takin pictures of it along with descriptions of it's construction shortly. old hoot. Matt. 24:44

-- old hoot (oldhoot@shawneelink.net), October 20, 2003.

why the capture links?? why not jsut post the site? I for one, dont like going to capture sites

-- Stan (sopal@net-pert.com), October 20, 2003.