Hi im gunna be starting hi school soon and am in the prosess of building go kart for my transportation to and from school and work. i have a snowmobile engine that my brother bought but didnt use.i was wondering if anyone could help me. i need info about how to rebuild it and how to make it do everything i neeed it to to. if u could please help me i would greatly appreciate it. Thx

-- aubaby888 (aubaby888@sbcglobal.net), August 09, 2003

Answers

1 fire up the motor 2 put oil shaft 3 put the shaft in ure pussy

-- Michael T Jenkins (bob123456@hotmail.com), August 11, 2003.

wow so thats how its done?

-- j (itsjamesn@hotmail.com), August 11, 2003.

I tried that, but she didn't like it!!! Said it was too cold! Are you suppose to warm up the shaft first? As for the origional question..... Strap down the motor to a wooden pallet, then pour a little pre-mix gas down the intake and try to start it up(just to make sure it runs). If it runs, search these forums for web sites posted. There is alot of info for plans on building stuff, just takes some research.

-- brian (brianlindley@hotmail.com), August 13, 2003.

who the hell is using my name and email and sending posts all arount this website!!!??? i posted 1 insult to that curry; baraclusa or whatever, but thats it.

-- Michael T Jenkins (bob123456@hotmail.com), August 13, 2003.

i'm just about finished building a gocart with a 339cc rotax ski-doo engine. i used 2 x 1" rectangular tube steel for most of the frame with 3/16" wall. spindle tubes and cradles for the front i had machined and it was easy as long as you have a way to measure the angle of the cuts for your spindle tubes to fit on the front axle. steering was easy too. the rod and pitman system. though make sure it is at least 1/8 inch thick pitmans and 3/8 inch thick rods. rigging the engine is hard. i kept the clutches, brake, and driveshaft intact. to rig the drive you just simply go from the engine/primary to your secondary which has the chain case to your live axle and make sure you hold the fuck on cuz with the right sprocket ratio you're doing 80kph no shit.

-- eat shit (chad_284@hotmail.com), December 08, 2003.

the shaft the shaft use it young grasshopper

-- Double Mcpoppinglocks (dr_bud420@msn.com), January 07, 2004.