How do i take off my Governor?greenspun.com : LUSENET : Junkyard Wars : One Thread
How do I take of my governor? I have a Tecumseh 9 hp engine.
-- Jason (firstname.lastname@example.org), June 04, 2003
whow AM I SUPOZED 2 KNO u ugley basterd
-- PENIS (email@example.com), June 04, 2003.
with a screaw driver
-- jo (firstname.lastname@example.org), June 12, 2003.
first y r u doing this if u take it off it will make your engin run faster but it will wear quickly. if u need more power take the exuast off or clean the intake.
-- Phast Phil (TakeItOff@YourOwnRisk.com), June 18, 2003.
Like said get rid of the exhaust, becuase if you take the governer off, your gonna have problems with throwing rods, the moters arent designed t run like that
-- TJ Poseno (email@example.com), June 30, 2003.
Do Not Take Of The Muffler your engine needs the back pressure your muffler prvides tou will ruine your engine.
-- brad (firstname.lastname@example.org), July 17, 2003.
Well dont take your exhaust pip[e off un less your going to put it back on with in a week,(or less), you will seize your engine, and any way, if you want more power, you either, get a new vbelt for your cent clutch, or change rear sproket to more teeth for power, less teeth for speed, or you can always slip on a header, i own a 94 manco ingo with 8 horse power, and its been broken constantly personally manco sucks to me, but i dont mind fixing it, ive been running it on 94 octane, and ive boared out the engine 3 times, i built a custom header, i put rear and fromnt suspension on it, <-- holy shiot thats alot of work, and I put on trruck tires on the front and back, mythe next thing im doing is getting rid of the engine,belt drive and sproket,and putting on a kawasaki 250cc 2 stroke, so i can shift,
-- Mike Hunt (email@example.com), September 14, 2003.
really a new question. In replacing the points on a 4hp snowblower engine there are two leads from the condenser. one leads goes to the common terminal to the points. where does the other one belong? please help before the snow flies. thanks.
-- charles andrew (firstname.lastname@example.org), November 03, 2003.
you can take off the governor just dont go full speed for too long, then u can blow ur engine, and dont take off ur exaust, i did that on my 49cc pocket bike and rode it nonstop for about 2 weeks and my carbuerater ended up gettin fucked up because i didnt have an exaust on, try screwing the air pressure screw in a little bit, it will have a little less pickup but alot more speed
-- bob peck (email@example.com), May 08, 2004.
Any1 know where ecactly the governer is located at?
-- Vince (firstname.lastname@example.org), February 20, 2005.