420 ez as a slavegreenspun.com : LUSENET : Canon EOS FAQ forum : One Thread |
Has anyone had a problem with using the 420 attached to a slave unit. I find that it fires for one shot only and then must be switched off and on agaain before the next shot. The camera and flash are set to manual.
-- John Gill (jdgill@lineone.net), June 07, 2002
This has come up here before and, yes, it's sadly typical behaviour for Canon flash units.
-- NK Guy (tela@tela.bc.ca), June 07, 2002.
Two things to try; Use tape to make sure none of the other contacts are shorting out. Buy an Ikelite Lite-Ling TTL slave. They always work and you can even use it in wireless TTL mode if you want.
-- Jim Strutz (j.strutz@gci.net), June 07, 2002.
That should read, "...Ikelite Lite-Link."
-- Jim Strutz (j.strutz@gci.net), June 08, 2002.