My camera battery died mid film roll...it rewound, but know when I insert a new roll, it loads it but won't let me take a picture/the no film icon flashes...yes I put in a new battery, I rewound an entire new roll of film and tried to depress the shutter...it doesn't let me do this.

-- Anne d (yelobug@prodigy.net), April 28, 2002

Answers

1. Read camera manual (page 17)
2. Remove any film from camera
3. Close the camera back
4. Set camera to GREEN mode
5. Push the shutter release button
6. Open camera back
7. Load film

-- Julian Loke (elan7e-owner@yahoogroups.com), April 28, 2002.

To retrieve a rewound film leader, use a film leader retrieval tool (about $20-$25). Or if you are desparate, try these links:

• http://www.kodak.com/cluster/global/en/service/faqs/ faq0017.shtml
• http://www.rit.edu/~rckpph/faq/28.01.html
• http://www.photo.net/bboard/q-and-a-fetch-msg?msg_id= 000ZhN
  
  -- Julian Loke (elan7e-owner@yahoogroups.com), April 28, 2002.

For more information, consult (or join) the EOS Documentation Project

-- Julian Loke (elan7e-owner@yahoogroups.com), April 28, 2002.