SX70 film jamgreenspun.com : LUSENET : polaroid transfers : One Thread
I just took a photo with my SX70 and the camera didn't eject the print.
It's an old film so I guess the battery's died. The autofocus is working fine though.
Is there a way I can unload the shot?
-- MIke McCree (email@example.com), January 04, 2002
You may wish to try going into a darkroom (total black) and then remove the film pack and re-insert it into the camera. The result of the above is that the camera will think the exposed film is a cover sheet and eject same. If nothing happens, then the pack is 'toast' and should be discarded.
-- Al Fairclough (Lensman@hotmail.com), January 12, 2002.