Relation between the Chamfered weld wheel width & Sheet thicknessgreenspun.com : LUSENET : Resistance Welding : One Thread |
PLease clarify the purpose of using different chamfer. i mean when to use 10 mm & when to use 8 mm chamfer? for Weld Wheel with respect to Sheet Thicknesses. Regards
-- Ronnie hains (ronjitsinha@rediffmail.com), December 21, 2001
I used a chamfered wheel on the upper of a seam welder to allow a thickness ratio of 1 to 5 welding stainless for a milk cooler at Dairy Equipment Corp in Wisconsin. The lower was 5/8" wide, the upper was 3/16" wide. This caused the nugget to form closer to the top, centering it on the faying surface.
-- David Bacon (dbacon@updatetechnology.com), April 19, 2002.