linhof angulon 90mm hole size?greenspun.com : LUSENET : Large format photography : One Thread
I think that this question had been asked before, but I can't find any thread about it, so here we go: can I fit my linhof angulon 90/6.8 on a copal #0 linhof/wista board, or do I need to find something with a smaller hole?
Thanks in advance,
-- Hagai Kaufman (firstname.lastname@example.org), November 03, 2001
The determining factor is the shutter name and size rather than the lens type.
-- Walter Glover (email@example.com), November 03, 2001.
The shutter is Synchro compur - it has no other designations.
-- Hagai Kaufman (firstname.lastname@example.org), November 03, 2001.
You are right this shutter uses a smaller hole the the usual copal 0 I have one and it looks smaller than the usual 0 . Maybe a 00 hole would do or could be slightly adapted. Mine is mounted on a custom made linhof plate.
-- andrea milano (email@example.com), November 03, 2001.
I've got the same lens and it mounts without any problems in #0-hole. Diameter should be 25mm.
-- Thomas Vaehrmann (TVaehrmann@web.de), November 04, 2001.
I recently purchased a Schneider 90mm f/8 Super Angulon with a Synchro Compur shutter from ebay. It came in a recessed Linhof lensboard. I have a Toyo 45CX. Will the Toyo recessed lensboard with Copal #0 work for this setup with ease? I am a beginner and would like a simple solution. Thanks.
-- Mark Wiens (firstname.lastname@example.org), November 06, 2001.