Push-on lens cap for M 50/2.8 lens hoodgreenspun.com : LUSENET : Leica Photography : One Thread |
Does anyone happen to know what size push-on lens cap will fit the M 50/2.8 lens hood (part #12549)?Thanks in advance.
-- David Cunningham (dcunningham@attglobal.net), October 22, 2001
For the current 50 Elmarit? Any of the metal push-on caps for the E39 Leitz lenses will fit. The lens comes with an aluminum cap which I'm sure can be purchased as a replacement from Leica parts dept.
-- Jay (infinitydt@aol.com), October 22, 2001.
Or alternatively you can use any 42mm diameter plastic lens cap .A few weeks ago I went to a binoculars store and went through their spares bin and picked out a couple of the strongest ones they had - cost me $1 each! At that rate you can buy scores of them and still come in cheaper than the original article (and you won't have heart attacks over scratching or losing them).
-- Andrew Nemeth (azn@nemeng.com), October 22, 2001.
Measure the diameter carefully and go to B&H's website and check there first. After that try your local hardware store for an ABS pipe end cap that is close in size. Line the inside with tape and voila!Cheers,
-- John Collier (jbcollier@powersurfr.com), October 22, 2001.
You do want a cap for the hood right?
-- John Collier (jbcollier@powersurfr.com), October 22, 2001.
Yes John, I'm looking for a cap for the hood. I know that a 40mm push- on cap fits perfectly on a E39 filter, but the 12549 and 12550 hood has a raised "knurled" ring that makes it larger than the 40mm smooth filter.Thanks
-- David Cunningham (dcunningham@attglobal.net), October 22, 2001.