Decoder for Proto SW9/1200greenspun.com : LUSENET : Wiring for DCC : One Thread
I have a new Proto 2000 SW9/1200 switcher that has no DCC plug. Life Like state in the instructions that due to the small sixe of this engine no plug could be installed. They show how remove the weight for a decoder.
Anyone who has installed a decoder in this engine would you pass on your decoder choice and any helpful suggestions for replacing the weight.
-- Blaine Benson (email@example.com), September 10, 2001
See http://www.ttx-dcc.com/products/ttxexclusive.htm The SW9/1200 decoder fits. but you will need to fiddle with the front & rear lamps. DonV
-- Don Vollrath (firstname.lastname@example.org), September 10, 2001.
NCE make one specifically to clip in place of the pc board. You can see it here http://www.ncedcc.com/catalog1.html and you can download the manual that tells how to fit it.
-- Nelson Kennedy (email@example.com), October 07, 2001.