efke 100 sheet film in Agfa Rodinal?greenspun.com : LUSENET : Large format photography : One Thread
Does anyone of you have data on developing efke 100 sheet film at its nominal speed in Agfa Rodinal? At digitaltruth.com, I only found sheet film data about *push* processing at 200 (14 minutes in 1+50)resp. 400 ASA (24 minutes in 1+50) - the times equal the pushing times for 35mm -, and there is 35mm data on slightly pull processing it at 80 ASA (5 minutes in 1+25). Can I use that 35mm data for sheet film? Do you have experience about processing it at 100 ASA (say 6 minutes in 1+25 as a guess)?
-- David Haardt (firstname.lastname@example.org), June 18, 2001
Hi David, 6 to 8 at 1:25 might be a good guess, but I'd think that would be for a fairly rainy day. 1:50 or 1:75 for a landscape at 8 to 12, but I'm guessing. Best, David
-- david clark (email@example.com), June 18, 2001.
Start with times for a comparable film like Agfapan 100, although Efke is likely to have fuller emulsion speed compared to Agfapan.
-- David Stein (firstname.lastname@example.org), June 18, 2001.
You might try conducting your own film speed test, and then you would know the correct speed and procedure for your equipment. Pat
-- pat krentz (email@example.com), June 18, 2001.
I used to develop their 120 roll film in Rodinal (1:100) for 11 minutes at 75 degrees to obtain an EI of 100. That was 10 years ago.
-- Ed Buffaloe (firstname.lastname@example.org), June 19, 2001.
I just got my shippment from Fotoimpex in Berlin. Their website has these developing times etc for PL100 http://www.fotoimpex.de/Technik/Entwicklertab/entwicklertab.HTM
Cheers and Good Luck!
-- Martin Reis (email@example.com), July 26, 2001.