Kernel32.dll proplem in WinOnCd PE 3.8greenspun.com : LUSENET : Video CD : One Thread
When using WinOnCd PE 3.8,I always encounter kernel32.dll problem during burning. Can anybody help?
-- Jason Leong (firstname.lastname@example.org), June 10, 2001
I dont know if you`ve got the same problem as me, but when ever i tried to burn a disc with winoncd with simulation checked it would always give me a kernel problem, if you`vwe got simulation checked in the record section uncheck it and see if it helps.
-- Alan (email@example.com), June 10, 2001.
Thank Q Alan. My problem is during the burn process. When "Make CD" process works it's way through until it comes time to "Build Disk / Perform makes". This process gets through 60%, and then quits with the Kernel32.dll error message.
-- Jason Leong (firstname.lastname@example.org), June 10, 2001.
You likely have a buffer underrun error which is linked to system resources. Check to make sure there is nothing big running in the background, in fact shut down anything you dont need running...skip the simulation run and burn to cdrw if you want to check it. Also, dont do anything else on the PC while the burn is under way. Other than that, you might need more memory.
-- tygrus (email@example.com), June 10, 2001.
Thank You Tygrus. I'll give it a try.
-- Jason Leong (firstname.lastname@example.org), June 11, 2001.
As a last resort, try uninstalling WOCD, scan and defrag your HDD, then reinstall and give it a try.
-- tygrus (email@example.com), June 11, 2001.