Flash six-20greenspun.com : LUSENET : Brownie Cameras : One Thread
I have a flash six-20 which needs a lot of work! The image in the viewfinder is terrible. Does anyone know how to remove or disassemble this viewfinder? I think this could be a good camera if I can get it cleaned up adequately.
-- John Reichenbach (firstname.lastname@example.org), May 04, 2001
If you are it is simple to take off the front. On each side of the front, halfway down the side is a little indentation in the metal side bit of the frontpiece. Carefully push the metal frontpiece here with a very small screwdriver and hopefully expose a tiny slot in the side which you can jam a tiny screwdriver in and lever off the front. Do this on both sides. Once the front is off it is easy to clean the mirrors and glass that makes up the viewfinders. If you have trouble you can email me.
-- Mike Le Fevre (email@example.com), May 12, 2001.