could someone tell my what the multiplex and demultiplex and all those settings means.

also what is the best fps setting to have. i have tried 60 but that doesnt work cos i get red and blue and pink squares here and there after converting. but if i have it at 59.64fps its fine. is 30 fine or if i can go higer the better? and the CBR kbps, what is that for. i can have it at 2950 and thats cool and also the res. Is 350x288 the right one to have for PAL output?

-- kellyc (kellyc@pqafrica.co.za), January 16, 2001

Answers

Depends on what you are trying to do. Here is a quick guide i found on a top site :-

VCD --> mpeg-1 1150 kbit/sec 352x288 pixels 25 frame/sec SVCD -> mpeg-2 max 2600 kbit/sec 480x576 pixels 25 frame/sec XVCD -> mpeg-1 max 3500 kbit/sec 352x288 pixels 25 frame/sec

Audio leave as 224 kbit/sec mpeg-1 layer 2

You may or may not need to de-interlace your image, i found adaptive blend to work o.k.

I get better results with this program than a lot of professional packages.

Look through previous posts for some sites with great guides/info.

Good luck

Pip

-- pipmaster (terrytemp@hotmail.com), January 16, 2001.

Isn't mux and demux part of the "tools" rather than settings?

-- Rusman E. Priyana (priyana@eudoramail.com), January 16, 2001.