I have read and learned a lot about peoples' opinions regarding the various drums and rotators on the market...but a couple of questions remain:

- I have not heard anything regarding the Beseler Color Print Processing Drum (11x14 to fit 4 4x5s). Does anyone have an opinion? How does it rate compared to the other drums?

- Similarly, any comments on the Beseler Motor Base Agitator? Would the Jobo expert drums fit on this model?

Thanks, and I look forward to the responses.

-- Malcolm Fox (foxmalcolm@aol.com), November 16, 2000

Answers

Go here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003xuw

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003iq2

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003fAK

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003Lop

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=003AQL

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=0035ID

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=002uec

& here:http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=002PGg

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=002OVx

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=001OvU

& here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=000lP4

& even here: http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=0007hz

and I'm sure there are a few I missed

-- Sean yates (yatescats@yahoo.com), November 16, 2000.

Sean - thanks for all the links. I don't know if you posted them as "hot" links (I didn't see them as such), but they don't work if you copy and paste them as is. You have to remove the space between the question mark and the msg_id. For example, this:

http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl? msg_id=0007hz

becomes

http://hv.greenspun.com/bboard/q-and-a-fetch-msg.tcl?msg_id=0007hz

BTW, is there a database search function for this message board? Maybe I'm looking right at it and don't see it.

Thanks again - Kevin

-- Kevin Bourque (skygzr@aol.com), November 16, 2000.

I didn't do 'em "hot" cause I don't know how. Must edyewkayt muhsef! I noticed there was something odd about them when I tried cutting and pasting to the address bar from the post, but couldn'f figure it out. Thanks for the diagnosis. Don't know why copying them from the address bar did that.

Unfortunatley the only way to search the archives is the ol' fashioned way - wunatatime.

-- Sean yates (yatescats@yahoo.com), November 17, 2000.

Hey folks,

I found this info at the jobo website:

http://www.jobo-usa.com/faq/drums_on_motorbase.htm

http://www.jobo-usa.com/faq/print_vs_film_in_drums.htm

http://www.jobo-usa.com/faq/film_tanks_vs_print_drums.htm

-- Sean yates (yatescats@yahoo.com), November 17, 2000.

For the archives:

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003xuw

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003iq2

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003fAK

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003Lop

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=003AQL

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=0035ID

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002uec

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002PGg

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=002OVx

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=001OvU

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=000lP4

http://hv.greenspun.com/bboard/q-and-a- fetch-msg.tcl?msg_id=0007hz

-- Josh Wand (josh@joshwand.com), December 08, 2000.