[SET] button

greenspun.com : LUSENET : MV Agusta F4 : One Thread

Hello thought I'd like to share this. The set button is used to change the mph<>km/h and deg-F<>deg-C. Start the engine, press [set] and the km/h will blink. Press the starter button and it will change to mph. Press [set] to confirm. The temp can also be done the same way. I will figure out the TRIP1/TRIP2 soon.

-- moderator (mvf4s@excite.com), May 29, 2000


If you press the START button with the engine running the display will cycle though the ODO, TRIP1, TRIP2, Clock sequence. A combination of fiddling with the START and SET buttons will set the clock and reset the TRIP odometers. Don't ask me the sequence I have to figure it out again each time. Damn this absence of a manual!

-- Scott Rothermel (jsratcas@aol.com), June 08, 2000.

...to reset the trip meter.... press the starter until you get to trip, press "set" hold starter button for 3-4 seconds... trip reset!

-- andy mac (andymcmac@ntmail.nete), July 23, 2000.

Moderation questions? read the FAQ