Horseman Rollfim Holder - Is it for 4x5 or 6x9?greenspun.com : LUSENET : Large format photography : One Thread
Being primarily a 35mm and medium format guy, I hope that it is appropriate for me to ask an elementary question on this list about equipment. If not, please let me know and I will scurry back to the Nikon list.
I acquired a new Horseman Roll Film Holder in a small lot of photo equipment at auction. It is for 6x9 format (marked "8 exp/120") The Horseman online catalog tells me that it is either for a 4"x5" camera (Horseman #451 roll film holder)or for a 6x9cm camera (Horseman #1 roll film holder).
There must be a simple identifier or dimension that will enable me to answer my question without Finding a Horseman to try it on.
Any help would be greatly appreciated.
Best regards, Gary
-- Gary Euler (email@example.com), April 27, 2000
The Horseman #1 measures 5.5 x 3.75 inches, the #451 is a bit larger.
-- Andreas Carl (firstname.lastname@example.org), April 28, 2000.
If it's designed for to be used on a 6x9 camera the mounting flange will be about 5 1/2 x 3 1/8 inches. If built to be used on a 4x5 camera it will have the dimensions of a 4x5 sheet film holder.
-- Garrett Adams (email@example.com), April 28, 2000.
Thank you gentlemen for assisting me with this question. It appears that I have new Horseman Roll Film Holder 1 for 6x9 format on a 6x9 camera.
It will not fit my Nikons, Bronica, Graflex or Anthony so I would entertain any suggestions you might offer for relocating it to a more ssuitable home.
-- Gary Euler (firstname.lastname@example.org), April 28, 2000.
To find a suitable home for a back you cannot use? Of the top of my head -- how about selling or giving it away.
-- Garrett Adams (email@example.com), April 29, 2000.
I have a 2x3 Crown Graphic that would make a nice match for your Horseman 6x9 back. Heck, if you send me the nack I'll even go out and buy a new Rodenstock lens for the 2x3 Graphic :-)
-- Darron Spohn (firstname.lastname@example.org), May 01, 2000.