Old Hobart electric grinders or partsgreenspun.com : LUSENET : Coffee Related Buy/Sell/Trade : One Thread
I have some old Hobart electric coffee grinders and some need parts. Am interested in Hobart electric grinders, any condition. Email Doug at email@example.com
-- Douglas Wight (firstname.lastname@example.org), March 13, 2000
I have such a machine. It needs a set of brushes for the motor, but I think I'll take the opportunity to get a new mill -- perhaps the Solis?
My Hobart is in excellent condition save for a crack in the lid.
-- Bill Snyder (email@example.com), June 25, 2000.
I have a Hobart Electric meat grinder. It is pretty old and needs some work. I am not sure how much it is worth. Would be interested in selling it.
-- Jody Farmer (firstname.lastname@example.org), October 05, 2001.
list the models and parts required, ive got a lot of working big heavy red hobarts and some not working
-- roger baker (email@example.com), April 22, 2002.
i have hobart coffee grinders....1924 1928 1930s 1940s beautiful some original .the 1947 double a&p looks like a show car! 21/2 hsp. electric motor!
-- n.j. collins (firstname.lastname@example.org), May 16, 2002.
any intrest in a model 3440?
-- travers smith (email@example.com), May 26, 2002.
I have just found a hobart model 2020 plugged it in works great still has old wiring cord ,1-10 settings for grinding,115-230 listing on plate set up for 110 made by hobart canada toronto do you have a use for this item very heavy on stand plus grinder receptacle pot
-- henry korstanje (firstname.lastname@example.org), June 03, 2002.
looking for service manual 1935 hobart meat grinder
-- al (email@example.com), October 19, 2002.
I have a 42yeara old coffee grinder which suddenly stopped working yesterday morning. I can't get the bottom off but I suspect that the problem is either the switch or some wire connection. It has workedvery well all these years. Do you do repairs?
-- Fraser Muirhead (firstname.lastname@example.org), December 08, 2002.
We have a old Hobart #84823 meat grinder and was wondering if there still are any parts out there a person could buy or get a book on it. We just bought this thing in October 2002.
-- ron schierbaum (email@example.com), January 05, 2003.
Interested in old Hobart meat grinder model #4212 working or not.
-- Doris Konermann (Makupldy@aol.com), January 22, 2003.
My Dad has a large dar red coffee grinder perfect working order.....model 2210. Interested in its value etc.Any thoughts?
-- Elaine Sellors (firstname.lastname@example.org), January 31, 2003.
I also have a very old Hobart meat grinder/sausage stuffer that I still use occasionally to stuff fresh sausage. I would like to find a place to have the grinding blade sharpened. Any suggestions?
-- Victor Brooks (email@example.com), April 29, 2003.
I have a good model 4332 and was wondering where to get a sausage or chili plate as all I have is the hamburger plate.
-- J. L. Pearcy (firstname.lastname@example.org), June 24, 2003.
I have a Hobart Model No. MC46. I would be very interested in a service, parts, or operating manual. A "xerox" or faxed copy would be fine. If someone wants to buy it, that's fine too. Let's talk.
-- Charlie Cash (email@example.com), November 18, 2003.
I have a model 4332 hobart meat grinder. I am needing an outer ring gear. cannot find any one that might have parts for me. Please help.
-- doris burfield (firstname.lastname@example.org), December 05, 2003.
I have a Hobart grinder serial #512834, Model 4212 and I need the outer case, hull, cover, housing or what ever it is called. Mine fell over and busted. Looking for a grinder not working so I could place the outer housing on mine. Or where can you order one?
-- Howard Mason (email@example.com), December 15, 2003.
There is an old one for sale on ebay right now and supposedly work .Check it out
-- Paul Bradley (firstname.lastname@example.org), December 20, 2003.
i have a 4312 meat grinder that works fine but i am hoping to find service partz for it, but hobart dosn't want to help. i do have extra plates, knives & a throat w/ ring
-- mike kubiak (email@example.com), January 06, 2004.
I Have a Model 4722 Hobart Meat GrinderI am interested in Selling I'm located in Green Brook.NJ
-- Ceil Brody (LPopcorn@aol.com), January 14, 2004.
I need a small pinion gear for the motor shaft of a Hobart 89770 made in the 1920's. It grinds coffee and poppy seeds on one side and meat on the other side. Any help would be appreciated, also looking for a xerox of a manual.
-- Jeff Tuminella (firstname.lastname@example.org), January 15, 2004.
I have a Hobart Model 3440 cofee grinder that works well. (I used it as a wheat grinder), but is missing the front panel and some chrome trim on the back. It is in San Deigo, CA
-- Bill Farnbach (email@example.com), January 17, 2004.
I have a model 4532 meat grinder. I am looking for a hamburger plate and cutter blade (knife) for this model. Also need operating manual. If you have any or know where I can get them please email me. Thank you. firstname.lastname@example.org
-- Connie Spencer (email@example.com), January 19, 2004.
I'm looking for an electric meat grinder to buy.Preferably 3/4hp to 2 hp.I live in Rochester Minnesota 55906.If you have one I'm interested.Let me know what the shipping would be etc.Thanks Mike
-- Michael H. Collins (firstname.lastname@example.org), January 29, 2004.
Please give me the address for the Hobart Co. We also have a meat grinder that now needs some repair.
-- Jean Glover (email@example.com), February 05, 2004.
Does anyone know where I can get a manual for a model 2P Hobart meat slicer (made in 1930). It still works!
Even Hobart can't get me one.
-- Christian Struven MD (firstname.lastname@example.org), April 24, 2004.
My brother has a Hobart Grinder Model # 4332 - is interested in a "washer type piece" that pushes the meat through and also a new knife piece or how/where to get sharpened -- do you have anything like this?
Also, do you have the address of Hobart Company. Thank you
-- N.Williams (email@example.com), September 06, 2004.
I have a Hobart mdl 4812 w/ extra cutters & stuffer attachments. Works great. All stainless. 8/lbs/min. Forsale I live Oregon.
-- Jim Stiverson (firstname.lastname@example.org), September 13, 2004.
Doug, I have a Hobart #4332 meat grinder of which I am in need of some parts. I need the complete worm shaft and worm housing. Mine split after someone dropped a plate in it while it was running. Iwould like to purchase a whole grinder thats not running or one that someone would like to sell. running or not. If anyone has pieces to a Hobart Model# 4332 please Call, Thanks, David
David Horvath 1399 Lamar Drive Kamloops, B.C. Canada, V2C 5C5 (250)573-3680
-- David Horvath (email@example.com), November 26, 2004.
Call this number 1-800-323-6800. It is Chicago Scale. They can make any part for these old Hobarts plus other brands. Thanks.
-- mike (firstname.lastname@example.org), December 30, 2004.
I have a Hobart 3440 coffee grinder which works well. Gray and black paint, could use some minor touchup. Despite the 230 volt mentioned on the nameplate, it operates on 120 volt house current. I am interested in selling it. Located in the Boston, MA area.
-- Gary Jacobson (email@example.com), January 01, 2005.