Need help from fellow riders who know CR's

greenspun.com : LUSENET : New England Motocross Racing : One Thread

I got..uh my friend has a '99 CR 125, and he has a CR 250 air boot that he wants to put on it. What my buddy needs to know is where can he buy the adaptor piece that goes over the bell of the carb so the 250 air boot can be installed. The place to find where you can buy this part was in a back issue of Motocross Action under the how to section. If anybody out there knows what issue this was in or where you can buy this adaptor piece for the bell of the carb. Please respond. Thanks Fellow Riders/Racers :o)

-- Brandon (motomunky@aol.com), March 08, 2000

Answers

Pro Circuit makes it....

-- Ron Sabin (ThefourSabins@aol.com), March 09, 2000.

whats up fellow honda rider i have a 1998 CR125 i've a ton of work to it one thing was the carb bellow i sent it to pro circiut and they installed for around $60.00 here are a few other things i did to it first of all you have to remember this wasn't one of hondas better years but heres what i did put a 95 cylinder along with the power valve put a rad valve on it boyseen float bowl changed the jetting it has a differnt jet needle 165 main jet 42 pilot airscrew at 2turns out increased air flow over radiator one tooth larger in the gearing procircuit pipe but i think an FMF would work better and i shimmed the exhaust 5mm to increase the low end and revalved the frontforks along with a bunch of other things hope thi info is help full email for more quetions if you want remember do little mods first to see how you like things these things cost a lot so do a little at a time and see how it pulls remember to check the plug color to make sure its not running to lean good luck ........matt

-- Matthew T. (matthewM300@aol.com), January 01, 2001.

Moderation questions? read the FAQ