Tamron Fotovix interface to Pcgreenspun.com : LUSENET : Imaging Resource Discussion : One Thread |
I have a Fotovix,using a 1/2" CCD and a high light source, this unit sends via an RCA pin jack a NTSC image of a slide or negative to a TV.What interface do I require, frame grabber, video card ,software etc to bring up an editable image on a PC. I am a novice!! Paul Woolston
-- Paul Woolston (zool@istar.ca), February 24, 2000
Your most economical option is probably going to be a Hauppauge Win TV card or one of its cheaper imitators. The frame-grab quality really isn't too bad, but don't expect dedicated scanner quality from it. Image quality on mine from a decent Intel webcam is about on a par with low-end digital cameras.
-- Pete Andrews (p.l.andrews@bham.ac.uk), February 28, 2000.
HIGH PAUL, I USE A "SNAPPY" WITH MY FOTOVIX. HAVE HAD BETTER LUCK WITH THAT THAN A REGULAR SLIDE SCANNER.FOR $90.00 IT CAN'T BE BEAT. WELL I SHOULDN'T SAY IT CAN'T BE BEAT. BUT, I HAVEN'T FOUND A BETTER WAY FOR BOTH SLIDES AND NEGATIVES. AND YOU AREN'T LIMITED TO 35MM SIZE. GOOD LUCK.
-- BOB TROWER (bobtrower@email.msn.com), March 31, 2000.