Yashica Mat 124G ( croping )greenspun.com : LUSENET : Bulletin Board for Medium and Large Format Photography : One Thread
could someone help me please, While surfing the photo sites I came across an article in reference to puting squares of tape in the four corners of the veiwing screen on the Mat 124 to allow for croping later in enlargments. I cant find the site again. If this makes sence too anyone Please help. I would be greatfull, for the step by step guide if any can be had Thank you
-- Ken Bauer (firstname.lastname@example.org), January 01, 2000
Doesn't make sense to me, what's the purpose? I could see using some of that really thin (1mm) tape found in drafting supply stores, or a magic marker, to give an outline for an 8x10 proportion on the screen; but I don't see a purpose in "squares" of tape.
-- Wayne DeWitt (email@example.com), January 07, 2000.
I've been waiting a week for someone to point out the obvious (doesn't seem like many people visit this message board). Putting an appropriately-sized square of tape in each corner serves the same purpose as placing individual lines on the groundglass - it will give an outline for 8x10 vertical and horizontal framing.
-- Wayne Dewitt (firstname.lastname@example.org), January 14, 2000.