Running on the main with a Reverse loopgreenspun.com : LUSENET : Wiring for DCC : One Thread
Just throwing the quistion out to the DCC world. I have a 12' by 17' layout and I presently have my DCS100 controling the mainline. My reverse loop is controled by my DB150.
Does it matter which unit (DCS100 or DB150) controls the main or reverse loop?
-- Lawrence Hannahan (email@example.com), November 19, 1999
Sould not make any difference at all. Both the DCS100 and DB150 have pretty much the same sensitivity for auto-reversing. Now if you want to look at the older DB100's, then either the DCS100 or DB150 should be used to auto-reverse, as the DB100 was ok, just the newer boosters are more sensitive and work faster.
Remember Always Have Fun and Enjoy!, Don Crano Akron, Oh NMRA #096211 mailto:firstname.lastname@example.org Visit Model Railroading with DCC at: http://pages.sssnet.com/donc/
-- Don Crano (email@example.com), November 19, 1999.