This continues with where Part 3 left off which is a listing of the more significant products that Baker Hughes Inc sells to the oil industry. These are simply parts that are NOT Y2K compliant. Factfinder's previous thread would lead the typical reader to think that there is no embedded systems problems. The following should eliminate Factfinder's fallacy once and for all. It's something that this list is long enough to break up into 3 separate threads. That's a lot. So here below is the next segment of rejoindering.

Baker Oil Tools http://www.bakerhughes.com/y2k/mby2k.htm Baker Oil Tools Completion Packer Products Completion Packer Products exception - EDGEb Compliance to be Determined ; disclosed under Remotely Actuated Products (Part 1) April 26, 1999 Baker Oil Tools Completion Packer Products Completion Packer Products exception - EDGEb Compliance to be Determined ; disclosed under Remotely Actuated Products (Part 1) April 26, 1999 Baker Oil Tools Flow Control Flow Control exception - Electronic Systems: Slick Set Firing Head Compliance to be Determined ; disclosed under Remotely Actuated Products (Part 1) April 26, 1999 Baker Oil Tools Remotely Actuated Products (Part 1) EDGEb Packers and Surface System Remote Controlled Plug Dropping Head Slick Line Setting Tool Timer Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures and BOT internal testing) May 4, 1999 Baker Oil Tools Remotely Actuated Products (Part 2) EASb Tubing Hangers EDGEb Surface Systems Obsolete ; Compliance not Evaluated April 26, 1999 Baker Oil Tools Advanced Data Monitoring and Instrumentation (Part 1) Surface Data Acquisition Systems PC Interface Cards and Software Portable Surface Interface Units Pressure and Temperature Sensors Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures and BOT internal testing) April 26, 1999 Baker Oil Tools Advanced Data Monitoring and Instrumentation (Part 2) Surface Data Acquisition Systems PC Interface Cards and Software Portable Surface Interface Units Pressure and Temperature Sensors Obsolete ; Compliance not Evaluated April 26, 1999 Baker Oil Tools Safety Systems Sub-surface exceptions - Time Cycle Control: Electrical Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Safety Systems Sub-surface exceptions - Measurement and Control: Flow Meters Information Processor (Digital Signal) Fluid Property Sensors Telecommunication Remote Power Supplies Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Safety Systems Surface exceptions - Panels Hydraulic: Single Well Hydraulic Panels Multi-Wells Hydraulic Panels Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Safety Systems Surface exceptions - Panels Pneumatic: Single Well Pneumatic Panels Multi-Wells Pneumatic Panels Pump C Pneumatic Panels Platform C Pneumatic Panels Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Safety Systems Surface exceptions - Panels Hydraulic/Pneumatic: Single Well Hydraulic/Pneumatic Panels Multi-Wells Hydraulic/Pneumatic Panels Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Safety Systems Surface exceptions - Panels - Miscellaneous: Miscellaneous Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Chemical Injection Systems Chemical Injection Systems Not Affected by Millennium Date Change or Leap Year April 26, 1999 Baker Oil Tools Chemical Injection Systems Chemical Injection Systems exception - BOT Pump Rate Program (design software) Compliance to be Determined ; Evaluation in Progress (pending internal BOT testing) April 26, 1999 Baker Oil Tools Gas Lift Gas Lift Not Affected by Millennium Date Change or Leap Year April 26, 1999 Baker Oil Tools Gas Lift Gas Lift exception - LIFT2 (design software) Compliance to be Determined ; Evaluation in Progress (pending internal BOT testing) April 26, 1999 Baker Oil Tools Liner Hangers Liner Hangers exception - Liner Hanger Electronic System: Electronic Plug Dropping Head Compliance to be Determined ; disclosed under Remotely Actuated Products (Part 1) May 4, 1999 Baker Oil Tools Remedial and Stimulation Products Remedial and Stimulation exception - Drillable Bridge Plugs: Wireline Set Bridge Plugs: Casing Drillable Bridge Plugs Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Inflatables Drill Stem Testing exceptions - Open Hole Conventional Open Hold Inflatable Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Inflatables Environmental Testing exceptions - Hydrological: Surface Data Acquisition Systems Pressure and Temperature Sensors Compliance to be Determined ; disclosed under Advanced Data Monitoring and Instrumentation Products. (Part 1) May 4, 1999 Baker Oil Tools Fishing "Big" Fishing exceptions - External Catch: Overshots Kelo Sockets Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Fishing "Big" Fishing exceptions - Special Use Fishing Tools: Jars Blow Out Preventer and Parts Valves and Chokes Blow Out Preventer and Valve Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Fishing "Big" Fishing exceptions - Running and Handling Equipment: Wireline Stripping Equipment Elevators Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Fishing "Big" Fishing exceptions - Miscellaneous Equipment: Mud Pumps Power Swivels Drilling Mud Motors Reverse Units Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Fishing "Big" Fishing exceptions (design software)- Remedial and Repairing Tools: Casing Patches Drilling and Milling Tools: Under-reamers Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Fishing Thru Tubing exception - Mud Motor and Accessories Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Sand Control (Part 1) Tools exceptions - SCS Retrievable Packers: Single String Retrievable Gravel Pack Gravel Pack Service Tools: Liner/Screens-Running/Releasing Tools Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Sand Control (Part 1) Tubing Conveyed Perforating exceptions- Perforating Equipment: Perforating Guns Perforating Gun Accessories Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) April 26, 1999 Baker Oil Tools Sand Control (Part 1) Tubing Conveyed Perforating exception (design software) - Sand Control Drill Stem Testing: Cased Hole Pressure Operated DST Compliance to be Determined ; Evaluation in Progress (pending internal BOT testing) April 26, 1999 Baker Oil Tools Sand Control (Part 2) Pumping Not Affected by Millennium Date Change or Leap Year April 26, 1999 Baker Oil Tools Sand Control (Part 3) Pumping Service: Data Acquisition Non-Compliant ; Remediation in Progress April 26, 1999 Baker Oil Tools Sand Control (Part 4) Pumping Service: Mixing Equipment Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures and internal BOT testing) April 26, 1999 Baker Oil Tools Sand Control (Part 5) Pumping Service: Offshore Not Compliant ; Remediation in Progress (pending vendor disclosure from the Republic Tide boat owner) April 26, 1999 Baker Oil Tools Supply Products Division (SPD) Production Products exception - Actuators Compliance to be Determined ; Evaluation in Progress (pending vendor disclosures) May 4, 1999 Baker Oil Tools Software Development Tubemove See detailed disclosure sheet August 23, 1999 Last update of Baker Oil Tools August 23, 1999. ___________________________________________________________________ Baker Petrolite http://www.bakerhughes.com/y2k/mby2k.htm Baker Petrolite Hardware & Software TNL Software "Amulet" and Hardware "Sentry" (Third-Party Programs) As disclosed by third-party (Corrosion and Condition Control Ltd.) June 28, 1999 Baker Petrolite EON 2000 Demand Trac Software "EonMan" and Hardware "Sentry" (Third-Party Programs) Compliant, As disclosed by third-party (LXF Incorporated) June 28, 1999 Last updated September 23, 1999. __________________________________________________________ Baker Process http://www.bakerhughes.com/y2k/mby2k.htm The following is a disclosure statement concerning the very first item on a list of Baker Process systems Read it carefully and as you get into it you see that while in the beginning the system seems compliant you find later that there are exceptions for it in certain aspects We've highlighted those aspects in RED for easier spotting and viewing. They come as part of the EXCEPTIONS SECTION. http://www.bakerhughes.com/y2k/mby2k.htm Baker Hughes Incorporated Baker Process Bird. Niagara. Horizontal Plate Filter June 7, 1999 This letter is designated as a Baker Hughes Year 2000 Product Readiness Disclosure that complies with the Year 2000 Information and Readiness Act (S 2392) passed by the United States Congress on October 19, 1998. As such, this statement is subject to the Year 2000 Information and Readiness Disclosure Act which may reduce your legal rights regarding your use of this statement. Product Definition

This disclosure is applicable to the Bird. Niagara. Horizontal Plate Filter designed and marketed by Baker Hughes Baker Process division. Except as noted in the following paragraphs and subject to the stated exceptions, Baker Hughes has determined that all models of the Bird. Niagara. Horizontal Plate Filter do not process date and time logic in their operation and do not contain any embedded technologies. Baker Hughes is designating all models of the Bird. Niagara. Horizontal Plate Filter as "Century Date Compliant".

Exceptions This disclosure does not apply to the (1) the Filtration Product Group, which is covered under a separate disclosure, and (2) any models of the Bird. Niagara. Horizontal Plate Filter that have customized configurations. In order to certify compliance of any special customized configurations, independent research will be necessary and may be billed on a time and material basis.

Disclosure The Bird. Niagara. Horizontal Plate Filter was internally evaluated for possible problems associated with operating in the year 2000. The evaluation took three general areas into consideration. (1) Clock chips that might malfunction at or after year 2000; (2) internal electronic logic which is hard-wired on logic boards that might incorrectly handle dates and leap years after the year 2000; and (3) software that contains embedded code which itself makes improper assumptions about month and year formats and leap year dates occurring after 1999. This statement is based entirely upon our evaluation of this product.

Additional Information A. For the purpose of this Disclosure, "Century Date Compliant" ("CDC") shall mean that neither performance nor functionality is affected by dates prior to, during and after the year 2000. In particular: No value for current date will cause any interruption in operation. Date-based functionality must behave consistently for dates prior to, during and after year 2000. In all interfaces and data storage, the century in any date must be specified either explicitly or by unambiguous algorithms or interfacing rules. Year 2000 must be recognized as a leap year. For all equipment, systems and products specifically certified by Baker Hughes as being Century Date Compliant ("CDC Products"), Baker Hughes warrants that its and its affiliates' or subsidiaries' CDC Products comply with the foregoing standards. THIS WARRANTY DOES NOT APPLY TO OTHER EQUIPMENT, SYSTEMS AND PRODUCTS PROVIDED BY BAKER HUGHES THAT HAVE NOT BEEN DESIGNATED BY BAKER HUGHES AS CDC PRODUCTS. EXCEPT AS SPECIFICALLY PROVIDED HEREIN, NO PRODUCT DISCLOSED HEREIN HAS BEEN CERTIFIED AS CDC PRODUCTS.

In the event any CDC Product fails to conform to the foregoing standards, Baker Hughes will repair or replace such CDC Product, provided that (i) Baker Hughes is notified thereof in writing by its customers within thirty (30) days from the date of shipment of the CDC Product from Baker Hughes stock point, (ii) the CDC Product has been used for the purpose for which it was designed and was used in accordance with all Baker Hughes' recommendations, and (iii) the CDC Product has not undergone repairs or alternations that were not authorized by Baker Hughes. To the extent authorized by its suppliers, Baker Hughes will assign to its customers any warranties for equipment, systems or products furnished by Baker Hughes' suppliers. The foregoing warranty shall not apply to: Any defects in computer chips or hardware utilizing computer chips that are not manufactured by Baker Hughes, in each case, resulting from the use of the chip with any date later than 1999. Failure of a CDC Product caused by a component furnished by a Baker Hughes supplier that is not Century Date Compliant. Failure of a CDC Product due to causes beyond its reasonable control (such as equipment, systems or products owned or operated by a governmental entity or other entity that are not Century Date Compliant). Additionally, CDC Products provided by Baker Hughes to its customers may be used in connection with equipment, systems and products furnished by its customers, including equipment, systems and products furnished to its customers through third parties. Baker Hughes' warranty obligations set forth above are conditional on Baker Hughes' customers notifying it of any possible obstacles (and any steps being taken to avoid or overcome the obstacles) that may impede Baker Hughes' compliance with the warranty stated in paragraph A, above. B. EXCEPT AS EXPRESSLY SET FORTH HEREIN, BAKER HUGHES MAKES NO WARRANTY, EITHER EXPRESS OR IMPLIED (INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY) REGARDING CDC PRODUCTS FURNISHED BY BAKER HUGHES. BAKER HUGHES' WARRANTY OBLIGATIONS AND ITS CUSTOMERS' REMEDIES ARE SOLELY AND EXCLUSIVELY AS SET FORTH HEREIN.

C. NOTWITHSTANDING ANYTHING CONTAINED HEREIN OR IN ANY OTHER AGREEMENT BETWEEN BAKER HUGHES AND ITS CUSTOMERS, WHETHER OR NOT THE DATE OF SUCH AGREEMENTS PRECEDE OR SUPERCEDE THE DATE HEREOF, IN NO EVENT SHALL BAKER HUGHES BE LIABLE TO ITS CUSTOMERS FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO LOST PRODUCT OR PRODUCTION, LOST PROFIT OR REVENUE, LOST BUSINESS OR BUSINESS INTERRUPTIONS, OR INCREASED OPERATING COSTS AND OTHER COSTS ASSOCIATED WITH DOWNTIME CAUSED BY THE INOPERABILITY OF ANY TOOLS OR EQUIPMENT, ARISING OUT OF BAKER HUGHES' FAILURE TO COMPLY WITH THE WARRANTY SET FORTH IN PARAGRAPH A, ABOVE AND REGARDLESS OF THE CAUSE, WHETHER OR NOT BASED ON NEGLIGENCE (SOLE, JOINT, CONCURRENT OR GROSS), STRICT LIABILITY, PRODUCTS LIABILITY, BREACH OF CONTRACT, OR ANY OTHER LEGAL FAULT OR RESPONSIBILITY OF BAKER HUGHES, ITS AFFILIATES, SUBSIDIARIES, OR THEIR RESPECTIVE EMPLOYEES OR AGENTS. Any questions regarding this statement should be addressed to the Baker Hughes Year 2000 Program Office or the Baker Hughes Corporate Legal Counsel. --------------------------------------------------------------------------------

-- R.C. (racambab@mailcity.com), November 18, 1999