lost print when refilling on ph dj 3000cp

greenspun.com : LUSENET : PosterShop Talk : One Thread

when i print a number of prints and the ink need to refill i often lose the next print in line. it prints about 1 cm and then advances the paper and reports a data error.

-- Anonymous, February 28, 1999


Hello Brian,

We did faced that problem before and hope we can help with below suggestion.

We faced this problem when we are printing using TCP/IP and please check whether you are also using TCP/IP printing. If your are using TCP/IP printing please check the the I/O timeout is set to a longer time - refilling for DJ3000 is 2.5 minutes but because of other time waiting procedure that the printer needs to do, you should set the time to more than 4 minute. I always set to 30 minute.

This I/O timeout setting is found under I/O setup on the printer front panel.

Hope this help.

Best regards.


-- Anonymous, March 21, 1999

I4m sorry but there is no solution for this but you can send a copy by copy because the HP refill between the copy,I do this but when it appears in a middle of a print copy the mark appears always. I think this is a wrong thing that this plotter have. Other is reduce the ink saturation in the media.

-- Anonymous, April 28, 1999

Moderation questions? read the FAQ