Pactor QSOgreenspun.com : LUSENET : Steve Heller's Amateur Radio Pages : One Thread |
Steve;My antenna is repaired, so I am ready to get on the air. How about trying for a pactor QSO at 0400 UTC on November 15 at a frequency of 14.079 MHz (center frequency)? That is my Tuesday afternoon, and your Monday evening. If that frequency is busy, I will try moving up in frequency in 1000 Hz jumps.
I would also like to try a PSK31 QSO at 0410 UTC on the same day, if I can figure out how to do PSK31 on my rig. Does anyone know how to do PSK31 using a SCS PTC-II TNC and XPWIN software?
-- Stephen Curtis (Stephen_Curtis@adidam.org), November 12, 1999
Sorry, I ment to try for a pactor QSO on Nov. 16 at 0400 UTC on 14.079 MHz (center frequency), and a PSK31 QSO at 0410 UTC on the same day.
-- Stephen Curtis (Stephen_Curtis@adidam.org), November 13, 1999.
I'll be listening for you on the 16th (UTC). Don't I have to know your Pactor ID?
-- Steve Heller (stheller@koyote.com), November 13, 1999.
Does anyone know how to do PSK31 using a SCS PTC-II TNC and XPWIN software?PSK31 was written up in the May 1999 issue of QST magazine. Basically all you need is a computer with a soundcard, a PSK31 program (which is freeware that you can download), and a couple of very simple circuits to feed the transmit audio from the soundcard into the microphone input and to key the transceiver from a COM port. I built them with a little bit of help, and I'm not that great at circuit construction yet. You don't need a TNC or any other software.
-- Steve Heller (stheller@koyote.com), November 13, 1999.