[
Post New Message |
Post Reply to this One |
Send Private Email to ron in n.y. |
Help
]
Response to cream separators
from ron in n.y. (ronmister@hotmail.com)
if you have ever had a chance to see a crean separator in use,as well
as to see all the parts that go together to make it work, You'd have
a good idea that it probably isn't within the grasp of most of us to
build one. The new separators that sell for around $200.00 work very
well and have only been available for a few years, to my knowledge.
Up until these came out a new one was several hundred dollars. If you
live in an area that had a lot of small dairy farms a few years ago
you may find a used one, but you really need to know what you're
looking at when you purchase a used one as there are several parts and
if anything is missing it won't work and the chance of getting parts
for an old machine is slim. Before we got a cream separator we had
some success skimming cream off the top of the milk by putting it in
wide shallow pans(like a cake pan) let it set for 24 hours and then
could skim the thin layer of cream that collected with a slotted
spoon. sometimes we would let it set even up to 48 hours but all
in all it was a lot of work for the results.(you have to cover the
milk or it picks up a "refridge" taste and then some times letting it
set for 48 hours would leave it with a goat flavor). Having a cream
separator is nice, I got mine as a gift and we take advantage of
having it, but I don't think I would spend 200.00 to replace it...ron
(posted 9625 days ago)
[
Previous |
Next
]