I've done stand development with both FX2 and Acutol (FX14). The most dependable approach is to use distilled water that has matched the ambient temperature of the room. The temp needs to be between 65 and 70 degrees F. Presoak the film for two minutes. Put the film in the developer and agitate continuously for one minute and then let stand for 60 - 90 minutes. Slower films work best. The developer needs to be fairly dilute. 1/2 standard dilution for FX2. I've been experimenting with 1:36 and .5:36 for FX14. Also cut back on your film area by about 1/3. For instance, I use a Combitank and I develop four sheets instead of six.(posted 8456 days ago)Hope this helps.