[ Post New Message | Post Reply to this One | Send Private Email to Bryan Morris | Help ]

Response to Canon XL1 audio

from Bryan Morris (brm@teleport.com)
Here's how I would set it up. Use the MA100 so you can plus an XLR cable into the camera. Plug the XLR cable from the MA100 into an audio mixer's output connector so that your sound person can operate independently from you camera person. Run XLR cable(s) from the mixer's input connectors to the appropriate microphone(s). This way you can use good microphones, a separate audio mixer and sound person, still record your audio tracks on the DV tape and get synch with your video, and not spend money on a DAT recorder you don't need.
(posted 9143 days ago)

[ Previous | Next ]